Hyper 212 Evo + Corsair Vengeance CMZ, will it fit?

[KaaN10]

Motherboard: ASRock Z87 Extreme4
CPU Cooler: CoolerMaster Hyper 212 EVO
RAM: Corsair Vengeance CMZ8GX3M2A1600C9B 8GB (2x4GB) DDR3

Just wondering if there's enough clearance for this to work?

 

[clutchc]

If you are going to have the EVO's fan blowing towards the back of the case, I would avoid memory sticks with tall heat syncs. The EVO sits quite close to the board.
My EVO needed its fan raised a bit to clear RAM in the first slot and I didn't have that tall of heat sync on my sticks. If you were to orient your EVO so its fan blows up towards the top of the case, it probably will be OK. But you'd want a case with a vented top to do that I would think.

The 212 is similar to the EVO, but sits much higher. http://www.newegg.com/Product/Product.aspx?Item=N82E16835103065

 

[Dark Lord of Tech]

I agree with the above statement , stick to lower profile ram , the tall modules are all show.

 

[clutchc]

+1^
Those heat syncs can be problems if the TIM dries out and the heat exchange is lost. But they look sexy.