Sign in with
Sign up | Sign in
Your question

How are my results "undervolting"

Tags:
  • Overclocking
  • Sabertooth
  • Intel i7
Last response: in Overclocking
Share
July 2, 2013 5:16:12 PM

so i dont know how to up load a picture or else it would be alot easier. 24 hours of Prime95 has been ran to ensure stability.

but either way this is my build:
i7 3770k with H100
Sabertooth Z77
Corsair 600T
ambulant temperature at 20 Celsius

i7 3770k at 4.0GHz Vcore at .995~1.018 runs steady at 1.008v. PLL voltage set at 1.5 also. Temps are steady at 50 Celsius and topped at 58 at one point with fans on low.

please let me know if theres anything i could improve on.

More about : results undervolting

a b K Overclocking
July 2, 2013 8:15:06 PM

I don't really think there is a standard for undervolting :D 
I'd say good :)  lil overclock and undervolt..nuffin' wrong with that :) 
I'm running an underclocked Yorkfield @ 2.8 cuz well..It's on a g41 mobo with...3+1 phase chokes
it's cool n stable :) 
a c 424 K Overclocking
July 2, 2013 10:07:14 PM

Looks pretty good, Is PLL at auto, can generally drop that some (leave the overvoltage on) even with a higher OC and can cool things a degree or 2 more,,,other than that from what I see, looks sweet !
Related resources
July 3, 2013 3:47:12 AM

Tradesman1 said:
Looks pretty good, Is PLL at auto, can generally drop that some (leave the overvoltage on) even with a higher OC and can cool things a degree or 2 more,,,other than that from what I see, looks sweet !


oh yeah i droped pll to 1.5 =] forgot about that
a c 81 K Overclocking
July 3, 2013 5:53:53 AM

Push the overclock further.
a c 424 K Overclocking
July 3, 2013 8:12:22 AM

Keep us updated
July 16, 2013 4:48:20 PM

Update:

i quit the undervolting, im at 4.8Ghz right now on 2.8v. temps are between normaly 60C and 70C max on prime95, testing stability atm. looking good so far!! =]

Update of an Update:

didnt last as long as i thought, will let you know when it becomes stable
a c 424 K Overclocking
July 16, 2013 4:50:02 PM

Looking Great! so far, keep us updated
July 16, 2013 7:21:16 PM

Update again....

its been most stable at this point. i had to increase voltage up to 3.3v and pll to 1.65 to keep a stable 4.8Ghz. its only been an hour of prime 95 but i think im doing well since the last few tries has failed under 20 mins. Temperature is still doing very well at 70C due to voltage increase but still havent hit 80C yet.
im not sure what voltage im should shoot for but im trying to stay under 3.5v. would that be an acceptable voltage for an everyday overclock? also how am i doing on temperature?? please give any suggestions. much appreciated.

also after i get it stable at 4.8Ghz i think im going to see if i can push 5.0Ghz just to see if i could do it. not for use but more for the fact that i can do it.
a c 424 K Overclocking
July 16, 2013 7:44:39 PM

Looking good, when you get a chance check what the PLL voltage is, can prob drop it about 0.06 or maybe more, let me know what it is first.
July 17, 2013 3:29:03 PM

Tradesman1 said:
Looking good, when you get a chance check what the PLL voltage is, can prob drop it about 0.06 or maybe more, let me know what it is first.


its at 1.65 already, i think its low enough i might tweak it a little when i have it stable. cause at this point i dont think its gonna really help that much by lowering, if anything i might need a little increase to help stability dont you think???
a c 424 K Overclocking
July 17, 2013 3:40:49 PM

Already been there heh :)  Looks good, A lot of people don't know they can generally lower the the PLL.....so, you're a step ahead of me ;) 
July 17, 2013 6:27:45 PM

Final Update:

so i went balls deep and gone to 5.0Ghz...... Failed due to overheating. i hit 90C after half hour of prime95 lol. looks like my spot is going to be at 4.9 until i can get myself a custom watercooling. but thank you all for supporting me through this =]
a c 424 K Overclocking
July 17, 2013 6:31:12 PM

No problem, great OC, congrats!
!