Connect 10G Ram in single channel mode or 8G in dual channel mode

[Essam6_4]

I have Motherboard GA-MA785GPMT-UD2H
Processor AMD Phenom II X4 955 BE
Ram ADATA 2G 1333MHz
and I bought new ram crosair 8G 2*4G 1333

I am asking about better between working with 8G ram in dual channel mode or working with 10G ram in single channel mode ?

 

[Tradesman1]

* in dual - but can try all ten in dual, put 4 GB sticks in slots 1-3 and the the 2GB in slots 2 and 4, will prob need an extra + 0.06 to the DRAM voltage and take CPU/NB (MC (memory controller)) voltage up to 1.25 to start, then give it a try

 

[Essam6_4]

* in dual - but can try all ten in dual, put 4 GB sticks in slots 1-3 and the the 2GB in slots 2 and 4, will prob need an extra + 0.06 to the DRAM voltage and take CPU/NB (MC (memory controller)) voltage up to 1.25 to start, then give it a try

Sir My adata 2G is one kit 1*2G not 2*1G so how I can run dual mode ?

 

[Tradesman1]

My bad, expected it was 2x1GB....not sure if your mobo can support flex if you put that stick in slot 2, which would in effect be 8GB in dual and the odd 2 in single, since you have the sticks you can always try

 

[karlosrehe]

at this spec it CAN BE run, it supports dual channel 1-2 and it chould work when nothing is damaged.

i succest 8 GB dual channel mode, it is better and faster.