Sign in with
Sign up | Sign in
Your question

i have just recently installed a motherboard and cpu into my computer. when i turn it on i get the error code 0x0000007B. i kn

Last response: in CPUs
Share
September 28, 2013 10:53:12 AM

i have just recently installed a motherboard and cpu into my computer. when i turn it on i get the error code 0x0000007B. i know that you are supposed to install windows again and when i try to do this the cd is not coming up as an option to boot the computer. what do i do?
a c 113 à CPUs
a c 558 V Motherboard
September 28, 2013 12:07:39 PM

Try setting SATA to IDE in BIOS and test. What motherboard and what SATA ports using for drives?
September 28, 2013 12:23:08 PM

alexoiu said:
Try setting SATA to IDE in BIOS and test. What motherboard and what SATA ports using for drives?


ASUS M5A97 LE R2.0 AM3+ AMD 970 SATA 6Gb/s USB 3.0 ATX AMD Motherboard, that is the motherboard. and when you ask for what ports im using you mean on the board right?
Related resources
a c 113 à CPUs
a c 558 V Motherboard
September 28, 2013 12:26:54 PM

Yes, but it doesn't matter, since AMD.
Are you using SATA 3 cables (the ones that came with the board) for connecting the drives?
Have you tried setting SATA to IDE in BIOS? Does it boot?
September 28, 2013 12:28:54 PM

alexoiu said:
Yes, but it doesn't matter, since AMD.
Are you using SATA 3 cables (the ones that came with the board) for connecting the drives?
Have you tried setting SATA to IDE in BIOS? Does it boot?


no im not using those cables, should i? and im going to try setting SATA to IDE now
a c 113 à CPUs
a c 558 V Motherboard
September 28, 2013 12:32:06 PM

Yes, you have to use those cables. Turn off the power before switching the cables.
September 28, 2013 1:12:27 PM

alexoiu said:
Yes, you have to use those cables. Turn off the power before switching the cables.


i just realized what the problem was,the board i have is only a SATA board where as my hardrive is a IDE hard drive so i have to get a IDE to SATA converter.
!