No Video Signal/Power Saving Mode

[DaithiTF2]

I just installed my new GTX 760. When I turned it on to see if everything was working properly I didn't get a video signal.

CPU: Intel Core i7 3770 @3.4GHz
GPU: NVIDIA GeForce GTX 760 w/ ACX Cooler
Memory: 8GB DDR3 Corsair Vengeance Blue @1600MHz
Motherboard: Intel® Desktop Board DZ77BH-55K

 

[nickbachu]

did you check the power connectors are connected to the gtx 760

 

[DaithiTF2]

did you check the power connectors are connected to the gtx 760

yes

 

[nickbachu]

are you sure the board is posting and is your computer making any beeps

 

[DaithiTF2]

are you sure the board is posting and is your computer making any beeps

I don't know what posting is, and the computer is not beeping. I also do not have speakers, but no noise is coming from my headset.

 

[nickbachu]

then most likely the card is defective or the cable your using

 

[DaithiTF2]

then most likely the card is defective or the cable your using

I doubt it's the card as I just got it today, and I installed it while wearing anti static gloves.

 

[nickbachu]

it can be defective from the company it happens

 

[DaithiTF2]

it can be defective from the company it happens

Even if the fans on the card are running? I mean my onboard graphics aren't working either.

 

[nickbachu]

you can try to reset the bios and see if it helps

 

[DaithiTF2]

you can try to reset the bios and see if it helps

How can I reset the Bios without being able to see the screen?

 

[nickbachu]

do you have the manual for the motherboard

 

[DaithiTF2]

do you have th manul for the montherboard

No, I do not. But I'm sure I could find one online somewhere.

 

[nickbachu]

here is a video that shows you have to reset the bios

 

[DaithiTF2]

here is a video that shows you have to reset the bios

I downloaded the latest BIOS, put it on a flash drive, removed the BIOS jumper, booted up the machine with the flash drive inside, and my monitor will still not turn on. Not even to show the most basic things.

 

[nickbachu]

the bios wont just flash from the flash drive and you need to switch the pin on the jumper not remove it and then boot and then switch back the jumper for it to boot properly

 

[DaithiTF2]

the bios wont just flash from the flash drive and you need to switch the pin on the jumper not remove it and then boot and then switch back the jumper for it to boot properly

Ok, I will redo the process and will switch the pin this time instead of completely removing the jumper.

 

[DaithiTF2]

YAY! IT WORKED! Thank you so much for all of your help!

 

[nickbachu]

your very welcome i would of kept looking for an answer lmfao glad to help and be sure to make sure you put this as solved