Sign-in / Sign-up
Your question
Solved

No Video Signal/Power Saving Mode

Tags:
  • Intel i7
  • Power
  • 760
  • Video
  • Geforce
  • Gtx
  • Tom's Guide
  • Monitors
Last response: in Displays
November 11, 2013 6:30:43 PM

I just installed my new GTX 760. When I turned it on to see if everything was working properly I didn't get a video signal.

CPU: Intel Core i7 3770 @3.4GHz
GPU: NVIDIA GeForce GTX 760 w/ ACX Cooler
Memory: 8GB DDR3 Corsair Vengeance Blue @1600MHz
Motherboard: Intel® Desktop Board DZ77BH-55K

More about : video signal power saving mode

a b C Monitor
November 11, 2013 6:45:14 PM

did you check the power connectors are connected to the gtx 760
m
0
l
November 11, 2013 6:49:28 PM

nickbachu said:
did you check the power connectors are connected to the gtx 760

yes
m
0
l
Related resources
a b C Monitor
November 11, 2013 6:53:14 PM

are you sure the board is posting and is your computer making any beeps
m
0
l
November 11, 2013 6:59:18 PM

nickbachu said:
are you sure the board is posting and is your computer making any beeps

I don't know what posting is, and the computer is not beeping. I also do not have speakers, but no noise is coming from my headset.
m
0
l
a b C Monitor
November 11, 2013 7:00:34 PM

then most likely the card is defective or the cable your using
m
0
l
November 11, 2013 7:04:36 PM

nickbachu said:
then most likely the card is defective or the cable your using

I doubt it's the card as I just got it today, and I installed it while wearing anti static gloves.
m
0
l
a b C Monitor
November 11, 2013 7:05:49 PM

it can be defective from the company it happens
m
0
l
November 11, 2013 7:19:44 PM

nickbachu said:
it can be defective from the company it happens

Even if the fans on the card are running? I mean my onboard graphics aren't working either.
m
0
l
a b C Monitor
November 11, 2013 7:21:02 PM

you can try to reset the bios and see if it helps
m
0
l
November 11, 2013 7:23:43 PM

nickbachu said:
you can try to reset the bios and see if it helps

How can I reset the Bios without being able to see the screen?
m
0
l
a b C Monitor
November 11, 2013 7:31:03 PM

do you have the manual for the motherboard
m
0
l
November 11, 2013 7:34:12 PM

nickbachu said:
do you have th manul for the montherboard

No, I do not. But I'm sure I could find one online somewhere.
m
0
l
a b C Monitor
November 11, 2013 7:36:17 PM

here is a video that shows you have to reset the bios
m
0
l
November 11, 2013 7:49:59 PM

nickbachu said:
here is a video that shows you have to reset the bios

I downloaded the latest BIOS, put it on a flash drive, removed the BIOS jumper, booted up the machine with the flash drive inside, and my monitor will still not turn on. Not even to show the most basic things.
m
0
l

Best solution

a b C Monitor
November 11, 2013 7:52:50 PM

the bios wont just flash from the flash drive and you need to switch the pin on the jumper not remove it and then boot and then switch back the jumper for it to boot properly
Share
November 11, 2013 7:54:24 PM

nickbachu said:
the bios wont just flash from the flash drive and you need to switch the pin on the jumper not remove it and then boot and then switch back the jumper for it to boot properly

Ok, I will redo the process and will switch the pin this time instead of completely removing the jumper.
m
0
l
November 11, 2013 7:58:01 PM

YAY! IT WORKED! Thank you so much for all of your help!
m
0
l
a b C Monitor
November 11, 2013 8:00:49 PM

your very welcome i would of kept looking for an answer lmfao glad to help and be sure to make sure you put this as solved
m
0
l