Sign in with
Sign up | Sign in
Your question

CoolerMaster Jetflo 120 (Thermaltake Water 2.0 Performer)

Tags:
  • Cooler Master
  • Cases
  • Enermax
  • Components
  • Thermaltake
Last response: in Components
Share
November 30, 2013 8:07:59 PM

I am needing to know if these fans would work with my case which is an Enermax LuxyRay Mid Tower along with my new Water 2.0 performer from Thermaltake. All of the reviews I went threw on these fans was the Corsair series of all in one liquid cooling units and nothing in regards of the Thermaltake brand all in ones. The main reason I am asking this is because I'm in need to replace a few of my case fans due to they have quit working but after thinking about it I have decide to go on and replace all of my case fans since I have had them for about three years now. Also why I was asking about my case is because my front intake fan sits inside a housing with long screws that holds it to the case and I didn't was any issues with trying to get it to fit right in my case. I'm also looking at some Enermax fans to for the in case of that these fans won't work with my cooler and case. Those Enermax fans are the Cluster Advanced series. I will pose a link to the CoolerMaster fans along with the Enermax fans. CoolerMaster link http://www.newegg.com/Product/Product.aspx?Item=N82E168.... Enermax link http://www.newegg.com/Product/Product.aspx?Item=N82E168.... Thanks.

More about : coolermaster jetflo 120 thermaltake water performer

December 2, 2013 3:08:46 AM

Hi Forgetfull,

The Jetflo will fit in your case as it is a 120mm fan.

Regarding your question:
Also why I was asking about my case is because my front intake fan sits inside a housing with long screws that holds it to the case and I didn't was any issues with trying to get it to fit right in my case.

This part I don't understand completely. Could you take some photos of it to make it more clear?
Thank you!
Related resources
December 4, 2013 12:41:51 AM

Hi, based on the picture you sent, I’m just wondering if you can also fasten the fan from the inside of the case, because our JetFlo uses a steel thread.
And could you give us the measurements of your current fan? Width and height.
December 4, 2013 5:17:00 AM

The front fan is a 120x120x25. Also there is no way to attach a fan threw the back due to the drive cage is about a half of an inch away from the front part of the case.
December 4, 2013 8:21:03 AM

Hi Forgetfull,

The JetFlo should fit in your case, but it depends on the length and width of the screws you have.
The ones provided with our cases will work and the measurements of those are as following:
Height: 2.9mm (the height is including thread)
Width: 0.25mm
Here is also a picture of how they look like:

December 4, 2013 12:50:49 PM

When I go and order them from Newegg I will let you how they fit and if I had any issues.
!