BSOD of Death Even After Replacing CPU Cooler

[sterwill]

Hello,
My custom-built computer keeps bluescreening because of the driver dxgkrnl.sys (here's a picture: http://www.pasteall.org/pic/show.php?id=63667). These problems started to occur a few months ago when I bought two new SSDs. Since then, I've tried various times unplugging them and what not, but it doesn't seem to be the issue. I've also bought a new CPU cooler, the Cooler Master Hyper212 Evo, to replace the Intel stock cooler because I thought the CPU was getting too hot, which didn't seem to resolve it, either. Any advice is greatly appreciated.
My system specs:
350 watt PSU
ADATA 16GB 1600MHz DDR3 RAM
Asus P8-H61-M Pro
2xKingston HyperX 3K 120GB
1TB 7200RPM Toshiba HDD
Intel Core i5 3350p
Cooler Master Hyper 212 Evo
Nvidia GeForce GT 640
NZXT. case fans
NZXT. Source 210 case
-Scott

 

[kenrivers]

It is probably a graphics card related issue. Either the graphics card is dying or you need to update the driver for it. If you have the most recent driver you could try rolling it back to an earlier version and see if that helps.

 

[CompGee]

Are you OC'ing? Undervolted components can cause this. Post the STOP codes too.