Device mgr says Nvidia card is working properly, but no signal to monitor

[claytonhamm]

Hi,

I had my computer sitting in my parents basement for a year while I was traveling overseas. I used to have two monitors running off of my NVidia GEForce 7025/nForce 630a (not sure which one it actually is, this is what device manager says)

I came back and started using this computer again, but the NVidia is not sending any signal to the monitors.

Device manager says its working properly. I updated drivers and still nothing.

The onboard card works just fine but it only has one VGA output so I can only run one monitor.

Is my card bad? When I start up computer instantly after I hit power button i hear the fans whirr on with two beeps but it has always made this sound even when I was running two monitors just fine. I do not think the beeps are indicators of a bad card because of this. After that there is no beeping.

Thanks for your help!

 

[lonewolf7]

You can try by taking out the card, clean dirt if any, then reseat it properly, see what happens.

 

[claytonhamm]

tried removing card and cleaning off any dirt, there wasnt much but a little bit. No change.

 

[lonewolf7]

Ok, then try it on another port, if available, or try the card on another system, to make sure it actually works. If the problem persists, then it could be a faulty card.