Computers built, how to install software

Status
Not open for further replies.

Scott783

Honorable
Jan 15, 2014
10
0
10,510
I’ve built the computer and its up and running, but don’t know where to go next. I have the tower hooked up to a monitor with a HDMI cable and a VGA cable. Neither is showing up on the monitor. what do I do?

Here is what i have

GPU - EVGA GeForce GTX760 FTW with ACX Cooler 4GB GDDR5 256Bit Dual-Link DVI-I DVI-D HDMI DP SLI

Power - Corsair Professional Series 760 Watt Digital ATX/EPS Modular 80 PLUS Platinum Power Supply AX760i

CPU - Intel Core i7-4770K Quad-Core Desktop Processor 3.5 GHZ 8 MB Cache BX80646I74770K Intel Core i7-4770K Quad-Core Desktop Processor 3.5 GHZ 8 MB Cache BX80646I74770K

Boot drive - Samsung Electronics 840 EVO-Series 250GB 2.5-Inch SATA III Desktop Kit Version Internal Solid State Drive

Operating system - Windows 8 System Builder OEM DVD 64-Bit [Old Version]

Memory - Corsair Vengeance 32GB (4x8GB) DDR3 1600 MHz (PC3 12800) Desktop Memory (CMZ32GX3M4X1600C10) Corsair Vengeance 32GB (4x8GB) DDR3 1600 MHz (PC3 12800) Desktop Memory (CMZ32GX3M4X1600C10)

Hard drive - Three WD Blue 1 TB Desktop Hard Drives: 3.5 Inch, 7200 RPM, SATA 6 Gb/s, 64 MB Cache -

Mother Board - Asus Z87-A DDR3 1600 LGA 1150 Motherboard Asus Z87-A DDR3 1600 LGA 1150

CD-ROM - Asus 24x DVD-RW Serial-ATA Internal OEM Optical Drive DRW-24B1ST (Black) Asus 24x DVD-RW Serial-ATA Internal OEM Optical Drive DRW-24B1ST (Black)

Case - NZXT KHAOS Black No Power Classic Series Full Tower