printer responds to wrong ip

[umm@gumma]

Printer IP was set at .100 w/ dhcp for testing something unrelated.

Changed to static .15, rebooted printer

Deleted dhcp lease from server

--Cannot ping .15,
---Printer responds to icmp at .100
----Web management page still opens on ..100! The printer nic is still serving this address or it's being translated somewhere. What am I missing?

 

[RL600]

1. Disconnect the printer from the internet or ethernet
2. Reset the printer to the factory settings.
3. Set the desired ip address
4. Connect to the ethernet or internet

I hope this helps

If this is not helping probably the dhcp server has still info about the printer please double check if there is something left on the dhcp server.