Hey Guys, I just built a new PC. During the build, I ran into no issues, took me roughly 1-2 hours and everything was fine. After I finished the build I plugged the DVI to VGA adapter into the graphics card and hooked it up t the monitor. All of the fans and lights turned on, but the monitor wouldn't receive any signal. I tried hooking it up to a backup monitor and it still didn't work. I looked to make sure everything was hooked up properly. I checked, double check and then triple checked everything and nothing was left unconnected. So, I was just wondering if anyone could help me out. I'll post my build below.
(BTW, These monitors both work on my other PC.)
Case - Rosewill Micro-ATX Mini Tower Computer Case with Dual USB 3.0, Dual Fans and 12.5-Inch Card LINE-M Black
CPU - AMD Athlon 760K X4
GPU - MSI R7 260X
RAM - Crucial Ballistix 8GB : 1600 MHz
HDD - 1TB Western Digital
PSU - 430W Corsair CX430
MB- MSI A78M-E35 Motherboard
THANKS IN ADVANCE.
PS: Yes, I have tried multiple times. Also, I would like it if I don't get answers like "Check your cables" because I have already ruled out that possibility.
(BTW, These monitors both work on my other PC.)
Case - Rosewill Micro-ATX Mini Tower Computer Case with Dual USB 3.0, Dual Fans and 12.5-Inch Card LINE-M Black
CPU - AMD Athlon 760K X4
GPU - MSI R7 260X
RAM - Crucial Ballistix 8GB : 1600 MHz
HDD - 1TB Western Digital
PSU - 430W Corsair CX430
MB- MSI A78M-E35 Motherboard
THANKS IN ADVANCE.
PS: Yes, I have tried multiple times. Also, I would like it if I don't get answers like "Check your cables" because I have already ruled out that possibility.