A motherboard Gybabite GA-h61m-s1 an support Hyper Evo 212?

[Ghon19]

Im looking for an after market cpu cooler and I was wondering if a Gybabite GA-h61m-s1 rev. 2.1 socket lga1155 can support a CPU cooler Hyper Evo 212. thanks for your answers

 

[COLGeek]

Yes. The 212 EVO works on nearly all Socket 1155 motherboards. The only concern might be the height of your memory and whether the EVO will clear it. What make/model of memory are you using?

 

[COLGeek]

Of course, the case could also be a limiting factor to ensure it is tall enough to accommodate the 212 EVO. What make/model of case are you using as well?

 

[Ghon19]

Of course, the case could also be a limiting factor to ensure it is tall enough to accommodate the 212 EVO. What make/model of case are you using as well?

Well, thanks for your time. about my specs
Case: Cooler Master Storm Scout 2
Height of the memory: i dont know what are you asking :S

 

[COLGeek]

Some memory modules have heat spreaders that make them too tall to fit under some after-market heatsinks. What make/model of memory are you using (intend to use) with this motherboard?

 

[COLGeek]

That case will be fine with a 212 EVO.

 

[Ghon19]

Some memory has heat spreaders that make them too tall to fit under some after-market heatsinks. What make/model of memory are you using (intend to use) with this motherboard?

By memory you are trying to say Ram memory? sorry for my ignorace

 

[COLGeek]

Yes, the RAM. No worries.

 

[COLGeek]

Here are 2 examples. Note the height differences:

http://www.newegg.com/Product/Product.aspx?Item=N82E16820104339

http://www.newegg.com/Product/Product.aspx?Item=N82E16820231314

And an extreme example:

http://www.newegg.com/Product/Product.aspx?Item=N82E16820144696

 

[Ghon19]

Here are 2 examples. Note the height differences:

http://www.newegg.com/Product/Product.aspx?Item=N82E16820104339

http://www.newegg.com/Product/Product.aspx?Item=N82E16820231314

And an extreme example:

http://www.newegg.com/Product/Product.aspx?Item=N82E16820144696

Thanks for your patience, well my memory: kingston hyperx blu 4gb ddr3 1333mhz

 

[COLGeek]

Should be fine. No worries on the memory being too tall.