Second oppinion on my planed build

[inseror]

Hey,
I am planing on starting on a new build in three weeks or so. I have picked to combination of parts mainly because it will most likely be used for professional CAD applications as well as 4k gaming and OC.
At this point I am pretty happy with my build but still I would like to hear some other oppinions or constructive criticism.

So here are the specs:
Case: Corsair - Carbide Air 540 CUBE
CPU: Intel Core i7-4770k @ as high as it lets me OC it
CPU Cooler: Corsair Hydro H110, fans changed to be quiet! Silent Wings 2 140mm
GPU: two EVGA GeForce 780Ti Classified or two Inno3D iChill GeForce GTX 780 Ti Black Accelero Hybrid
Motherboard: ASUS Maximus VI Formula
Memory: Corsair XMS3 Dominator 32GB 2133
Fans: 3x 120mm in the front
1 140mm in the rear

 

[chicken4thewin]

Two things:
-wow...
-where'd you get the f*cking money for this...

[edit] WAY more than will EVER be needed

 

[inseror]

well as I briefly mentioned it is mostely a professional computer so there are some tax benefits that make it cheaper as well as it will pay off over time eventually.

 

[numanator]

Everything there looks good, do you know what power supply and storage you will be using?

Edit: Saw the PSU listed with the memory, good choice of PSU.

 

[inseror]

As powersupply I thought Corsair AX Professional Platinum AX860 and storage a samsung evo ssd for the op. system and a wd black as masstorage

 

[numanator]

For the RAM, you want to make sure that it is 1.5v, some ram sets (especially over 1866 mhz) are 1.65v and the intel cpus only support 1.5v +/- 5%

 

[inseror]

that memory runs at 1.65V I thought they would work even though I heared the stories of over 1,5 beeing harmfull....mhm...my motherboard deffinetly supports it. Any expert oppinions? Internet does not give a definite answer

 

[numanator]

Do you know what a CAS Latency it has (CL)? 1866 mHz ram at CL 9 will be faster than 2133 mHz at CL 11. Basically the 1.5v is intel's recommendation, I have seen a few threads on these forums where people have had problems due to it but not too many. It may be a hit or miss type thing, I wouldn't risk it. Here are some sets I found at 1.5v

Memory: G.Skill Ripjaws Z Series 32GB (8 x 4GB) DDR3-1866 Memory ($315.98 @ Newegg)
Memory: Corsair Vengeance 16GB (2 x 8GB) DDR3-2133 Memory ($174.99 @ Best Buy)
Memory: Corsair Vengeance 32GB (4 x 8GB) DDR3-2133 Memory ($360.98 @ Newegg)
Memory: Corsair Vengeance Pro 16GB (2 x 8GB) DDR3-1866 Memory ($142.99 @ Newegg)

 

[inseror]

Homepage sais it has CL9-11-10-27
well i think i´ll agree. don´t want to take chances, the ram clock speed doesn´t make that much of a difference anyway

edit: I found the same ram kit at 1866 with 1,5V so I think I´ll go with them. I just like the looks of that Ram

p.s. can anybody tell me what the difference between 1,5 and 1,5V is on the Corsair site when it comes to memory voltage? I thought the V simply a unit