Good day to all.
Question about constant voltage. 4670k, closed loop water cooler, z97 asrock uefi updated.
Running a 4.3ghz overclock right now and I am trying to determine what controls the idle vcore voltage when the system is in override mode.
1.25v, did occt for 30mins temps peaked at 63c idle at 28-31c. When the stepping drops the idle clock to 800mhz the voltage has no change. In adaptive mode the voltage drops to match, but I am nervous to put in adaptive since when under load I see voltage can go to 1.26+. Tried the FIVR negative thing presuming that was it with no avail.
My TLDR is how can I have idle voltage drop to match current clock in override mode. Also if you feel like answering, should the voltage be my limiter or cpu temps. 1.25 is a scary bridge =)
Thanks in advance.
-Brandon.
Question about constant voltage. 4670k, closed loop water cooler, z97 asrock uefi updated.
Running a 4.3ghz overclock right now and I am trying to determine what controls the idle vcore voltage when the system is in override mode.
1.25v, did occt for 30mins temps peaked at 63c idle at 28-31c. When the stepping drops the idle clock to 800mhz the voltage has no change. In adaptive mode the voltage drops to match, but I am nervous to put in adaptive since when under load I see voltage can go to 1.26+. Tried the FIVR negative thing presuming that was it with no avail.
My TLDR is how can I have idle voltage drop to match current clock in override mode. Also if you feel like answering, should the voltage be my limiter or cpu temps. 1.25 is a scary bridge =)
Thanks in advance.
-Brandon.