Bootable HDD USB with NTFS

[kenezzz]

Hello
How to make a bootable USB HDD (500GB Adata HD710) with NTFS partiotion, and with DOS (command prom)?
I try make by RMPrepUSB but have info. NTDLR is missing... after boot from HDD.
I have searched everywhere, for nothing.

Please help me with this.

 

[drtweak]

RMPrepUSB is not meant for USB HDD they are Meant for USB Flash drives. I know i use it a lot for works to boot between 20 or so differnet programs and window installs.

 

[steve6375]

Hello
How to make a bootable USB HDD (500GB Adata HD710) with NTFS partiotion, and with DOS (command prom)?
I try make by RMPrepUSB but have info. NTDLR is missing... after boot from HDD.
I have searched everywhere, for nothing.

Please help me with this.

Hi
I am the author of RMPrepUSB. It can be used on USB Flash drive or USB HDD (or even internal SATA/SCSI/IDE HDD).
I think the problem is that DOS (MS-DOS or FreeDOS) does not support the NTFS filesystem when booting.
To boot to DOS you need a FAT12 (floppy), FAT16 or FAT32 formatted disk.
Once you boot to DOS, you can load an NTFS driver so that you can access NTFS partitions, but you cannot boot from an NTFS partition.