Fractal R4 Got the parts how to put togather

[Noitidart]

Hi all,
I've never put togather a computer before. I got all my parts and have no idea once I took off the side cover where to start. It says to mount my ssd before installing mohterboard.

Please help these are my parts:

PCPartPicker part list: http://pcpartpicker.com/p/vhjddC

CPU: AMD A10-7850K 3.7GHz Quad-Core Processor
Motherboard: ASRock FM2A88X Extreme6+ ATX FM2+ Motherboard
Memory: Mushkin Redline 16GB (2 x 8GB) DDR3-2133 Memory
Storage: Samsung 840 Pro Series 256GB 2.5" Solid State Drive
Storage: Seagate 2TB 3.5" 7200RPM Internal Hard Drive
Case: Fractal Design Define R4 (Black Pearl) ATX Mid Tower Case
Power Supply: Corsair CSM 450W 80+ Gold Certified Semi-Modular ATX Power Supply

 

[BustaRhymes]

It would be kind of hard to explain typing, but you should be able to find quite a lot of tutorials on youtube and they show you step by step. Your case is pretty standard mid tower so it should be fairly identical to the ones in the tutorials.

Good Luck.

 

[Noitidart]

Thanks man youtube wsa nice I searched some stuff. I hope I'm doing this right haha. There's this foam around my mobo and its zip tied through what I think should be some of the stanoff screw points, i cut these off right?

 

[Noitidart]

Question all, my chasis fan 1 is a 3 pin connector but the FM2A88X board has 4 pins on the connector for cha fan 1. I fit the 3 pin connector onto the 4 pin on the board is this ok?