Sign in with
Sign up | Sign in
Your question

EVGA Teases ACX 2.0 GPU Cooler

Tags:
  • EVGA
  • Graphics Cards
  • Cooling
Last response: in News comments
Share
a b U Graphics card
September 17, 2014 3:11:24 PM

EVGA's new ACX 2.0 GPU cooler is more than meets the eye.

EVGA Teases ACX 2.0 GPU Cooler : Read more

More about : evga teases acx gpu cooler

a b U Graphics card
September 17, 2014 3:45:55 PM

hmm..as long as the GPU can be overclocked with this new design im for it.
m
0
l
a c 91 U Graphics card
September 17, 2014 3:54:46 PM

Could be awesome, but to be honest...

I would actually rather have the stock cooler. A cooler that is QUIET when it handles a 250w card, that blows the hot air out the back of the case, that's been put on a 165-180w card? Yes please! That's pretty much a dream for a small form factor builder like myself.
m
2
l
Related resources
September 17, 2014 6:20:58 PM

I'm completely bored of the "teases" and rumors now. It's now just a video card to me. Release the damn thing already or shut up about it.
m
0
l
a b U Graphics card
September 17, 2014 7:15:56 PM

more efficient doesnt mean lower temps..... theres more ways to get better efficiency in heatsink design than to just lower temps.
m
0
l
September 17, 2014 10:37:33 PM

cbrunnem, your comment makes no sense.

What the article is talking about is that the new 980 GTX is going to be running 175w tdp, in comparison to the 290x which is 290w tdp and 780 GTX which is 250 tdp.

Less power = less heat generation, and if it performs the same or better, would by definition make it more efficient. derp
m
0
l
September 17, 2014 11:56:45 PM

My Sapphire Vapor-X cooler makes my 290 run a bit cooler than a 780/Ti. Had E-VGA GPU in the past... i was impressed about it at first then i got my 290 Vapor-x ... this card is impressive... and all this time i was looking at Sapphire as a low grade company.
m
0
l
September 18, 2014 12:49:26 AM

Quote:
Could be awesome, but to be honest...

I would actually rather have the stock cooler. A cooler that is QUIET when it handles a 250w card, that blows the hot air out the back of the case, that's been put on a 165-180w card? Yes please! That's pretty much a dream for a small form factor builder like myself.


Out the back is the problem. The non reference designs can be very cool and very quiet, but they pass the responsibility for cooling to the rest of the case. Shoulder your own burdens, GPUs!
m
0
l
September 18, 2014 1:15:03 AM

I don't love anymore EVGA since Palit got a lead with it's high quality Gainward Phantom series.
m
-4
l
a c 96 U Graphics card
September 18, 2014 11:28:27 AM

Ball bearing! Really! Teaser video does not really catch the eyes. What EVGA is really upto?
m
0
l
September 23, 2014 5:49:26 AM

The fans are not reverse flow. Look at the cross-section of each blade - they subtly curve downward, which means they will most likely blow down on the card.

As for the blades curving out in the opposite the direction of rotation - this reduces drag (less pressure build up in front of each blade). Given EVGA's goal to make this the most efficient cooler, they also wanted to reduce the power draw of the fan motors. Reducing drag reduces the power required to spin the fans.

It looks to me like they were looking for a good compromise between static pressure, air flow, reduced drag/motor draw and low noise. Only issue I can see is that an outward blade curve design like that will tend to create more centrifugal (outward) flow and less axial flow (downward). One way to combat this would be to have a close-tolerance shroud or duct surrounding each fan.

But, we'll have to wait and tested it to see how it actually performs.
m
1
l
a c 184 U Graphics card
September 24, 2014 10:11:11 PM

Looks reverse air-flow to me.
Now that the cards are available go to the website and compare the GTX970 and GTX770 with ACX.

The fan spins CLOCKWISE, but the more I stare at it I don't understand why anyone would think it pushes air towards the mount.
m
0
l
a c 77 U Graphics card
September 24, 2014 10:31:49 PM

photonboy said:
Looks reverse air-flow to me.
Now that the cards are available go to the website and compare the GTX970 and GTX770 with ACX.

The fan spins CLOCKWISE, but the more I stare at it I don't understand why anyone would think it pushes air towards the mount.

There's a youtube video EVGA put out to advertise the ACX 2.0 cooler. During it they show an exploded picture of the fan to show the new bearing, and then following that (and a point of view change) they specifically show it rotating anti-clockwise, which would indicate the card is based around normal direction air flow (air being pushed through the heatsink).

https://www.youtube.com/watch?v=JERkKJvcDNM at about the 1 minute mark.
m
0
l
September 25, 2014 5:54:39 AM

photonboy said:
Looks reverse air-flow to me.
Now that the cards are available go to the website and compare the GTX970 and GTX770 with ACX.

The fan spins CLOCKWISE, but the more I stare at it I don't understand why anyone would think it pushes air towards the mount.


Both the previous ACX fans and the new ACX 2.0 fans spin counter-clockwise. The blades have a different sweep, but they spin the same direction.

You have to look at the cross-section of the fan blades (not the direction of sweep away from the center axis), that will tell you which way they spin and push the air. Which ever side of the blade is concave or "scooped" is the side that pushes the air away. The EVGA ACX 2.0 blade cross-section is quite flat, but there is a very subtle curve to it. If you look closely you can see the one side is curved outward (convex) like an airplane wing, which will effectively help pull air in while the other (scoop) side pushes.

Fans are much more efficient at moving air via pushing/blowing it rather than pulling/sucking it. You can put your hand some distance away from a running fan and still feel the air blowing, but you have to put your hand very close to the blades to feel it sucking.

100% these are counter-clockwise spinning fans. ;) 



m
0
l
!