Sign in with
Sign up | Sign in
Your question

Trident X 2400 Secondary Timings

Tags:
  • DRAM
  • Overclocking
  • Trident
  • Memory
October 9, 2014 8:11:34 AM

I am tweakings the secondarys of my Trident X 2400 memory and all seems fine,dram 1.65 volts ,VCCSA is stock 0.925,my timings are 10 10 12 24 1T .The second timing I could drop from 12 to 10 ok,no lower.The first or fourth if lowered no boot,and the third if lowered not stable with prime stress test.Now when running tighter secondarys is the dram and vccsa volts ok at stock volts,or should I give them a little more to be stable.I remember something about that the vccsa volts is the one you need to up a bit for tighter timings and the dram volts are raised for running the ram at higher frequencey.I hope I am correct on this,if not let me know and if I should raise the volts on any of the two I mentioned.Thanks...

More about : trident 2400 secondary timings

!