Hi guys, I'm nowhere close to an expert and just after a bit of help and a few other opinions. Im building this for a friend that uses Delcam Software for Designing of Orthotics.
The budget is $1000 and im trying to keep it as low as possible.
Intel Core i5-4690K Devil's Canyon 3.5GHz 6MB Retail Box
GeIL 8GB Kit (2x4GB) DDR3 Evo Veloce C9 1600MHz
Corsair CX500M 500W 80PLUS Bronze Semi-Modular Power Supply
Samsung 840 EVO Series 2.5" 7mm 120GB SSD
Fractal Design ARC Midi R2 Black Mid Tower Case w/Side Panel Window
Gigabyte Z97 HD3 LGA1150 ATX Motherboard
Cooler Master Hyper 212 EVO CPU Cooler
He is looking for an upgrade from his current setup which is a dell workstation running a Q6600 cpu and a quadro fx4600 which i plan on using in this new build.
Im not very familiar with cad workstations so any help would be great appreciated
Cheers.
The budget is $1000 and im trying to keep it as low as possible.
Intel Core i5-4690K Devil's Canyon 3.5GHz 6MB Retail Box
GeIL 8GB Kit (2x4GB) DDR3 Evo Veloce C9 1600MHz
Corsair CX500M 500W 80PLUS Bronze Semi-Modular Power Supply
Samsung 840 EVO Series 2.5" 7mm 120GB SSD
Fractal Design ARC Midi R2 Black Mid Tower Case w/Side Panel Window
Gigabyte Z97 HD3 LGA1150 ATX Motherboard
Cooler Master Hyper 212 EVO CPU Cooler
He is looking for an upgrade from his current setup which is a dell workstation running a Q6600 cpu and a quadro fx4600 which i plan on using in this new build.
Im not very familiar with cad workstations so any help would be great appreciated
Cheers.