No monitor signal on my new build

[Acidic07]

I started a new build lat night, when I go to boot yp, everything appears to be in order, however, i'm not getting any moniter signal, I have a GPU, my montherboard does not support on board graphics. I've been looking in the forums, but nothing I have found seems to correct my issue. When I boot the system, my moniter goes right into sleep mode.

 

[alexoiu]

Detailing the components might help.

 

[Acidic07]

Detailing the components might help.

ASUS M5A97 R2.0 mobo

GEFORCE GT730 GPU

EVGA 500 watt poer supply, not 100% sure on the model number right at the moment,

Kingston Hyper X 8GB Ram (2x4)

AMD FX6300 CPU
If you need more, please, just let me know, i'll give you any infromation I can, I have run through the check list on the site as well, but i'm not against trying anything else.

 

[kranthi chevuri]

Check CPU FAn is Running Or Not, If That is Running , Try To Reinsert Ram

 

[alexoiu]

What are the last 4 digits on a sticker like
http://www.guru3d.com/miraserver/images/2011/990fx-sabertooth/IMG_4499.jpg
and what ports using for connecting the monitor to the card (DVI to DVI, VGA to VGA...)?

 

[Acidic07]

Power supply EVGA 500W ATX12V / EPS12V, I am using the HDMI port on the GPU, the monitor is actually my tv 32" Emerson

 

[Acidic07]

Check CPU FAn is Running Or Not, If That is Running , Try To Reinsert Ram

All of my fans are running, cpu, case, and GPU fan

 

[kranthi chevuri]

Check CPU FAn is Running Or Not, If That is Running , Try To Reinsert Ram

All of my fans are running, cpu, case, and GPU fan

Is It Your Keyboard NCS lights (Numlock, Caps lock, Scroll lock) Blinks 2 times When You Power up the System ??

 

[Acidic07]

What are the last 4 digits on a sticker like
http://www.guru3d.com/miraserver/images/2011/990fx-sabertooth/IMG_4499.jpg
and what ports using for connecting the monitor to the card (DVI to DVI, VGA to VGA...)?

Power supply EVGA 500W ATX12V / EPS12V, I am using the HDMI port on the GPU, the monitor is actually my tv 32" Emerson

 

[alexoiu]

Power supply EVGA 500W ATX12V / EPS12V, I am using the HDMI port on the GPU, the monitor is actually my tv 32" Emerson

Check the digits on that sticker when able to, but I think that the problem is related to using a TV instead of a monitor.
Try borrowing a monitor and testing.

 

[Acidic07]

Check CPU FAn is Running Or Not, If That is Running , Try To Reinsert Ram

All of my fans are running, cpu, case, and GPU fan

Is It Your Keyboard NCS lights (Numlock, Caps lock, Scroll lock) Blinks 2 times When You Power up the System ??

All of those seem to be working fine as well.

 

[kranthi chevuri]

So Keyboard Is Responding Correctly , But Not Display,

Try To Remove Graphic Card Once And Start The PC Without Connecting Display And Power off,
Remove The Cmos (Bios) Battery And Wait 10 to 20 sec And Re-insert,
Plug-in The HDMI Cable , Start The System,,

Try this Once

 

[Acidic07]

So Keyboard Is Responding Correctly , But Not Display,

Try To Remove Graphic Card Once And Start The PC Without Connecting Display And Power off,
Remove The Cmos (Bios) Battery And Wait 10 to 20 sec And Re-insert,
Plug-in The HDMI Cable , Start The System,,

Try this Once

I'll give that a shot as soon as I am able, it will be this evening, wghen I get back, i'll post an update then, thamnks for your help.