Isuse with Crucial MX200 250GB SSD in raid 0

[lpc1andonly]

Has anyone had this issue :
I'm trying to set up a RAID 0 using 2 Crucial MX200 250GB SSDs.
I can set it in BIOS, create an LD (ctrl-f), but when I load windows 7 it dose not see it. I contacted ASUS and updated my BIOS and downloaded the lattes driver.
System:
ASUS Crosshair V Formula z
AMD FX-9370 4.4MHz
32GB G-Skill 2400MHz DDR3
EVGA GTX 970 SSC x2(SLI)
2 OCZs 120GB RAID 0
1 Seagate 1.5TB HDD
1 Seagate 2TB HDD
1 LG Blu-Ray burner
Thank You.

 

[Dereck47]

If your Crucial RAID-0 array is connected to your ASMedia SATA ports (SATA6G_E1 or SATA6G_E2), then it's possible that you need to install the ASMedia SATA Controller Driver (version 2.0.8.0) in order for Windows to recognize the array.
https://www.asus.com/us/Motherboards/CROSSHAIR_V_FORMULAZ/HelpDesk_Download/

See pages 1-37 & 1-38 of your motherboard manual to verify where your drives are connected.

 

[lpc1andonly]

If your Crucial RAID-0 array is connected to your ASMedia SATA ports (SATA6G_E1 or SATA6G_E2), then it's possible that you need to install the ASMedia SATA Controller Driver (version 2.0.8.0) in order for Windows to recognize the array.
https://www.asus.com/us/Motherboards/CROSSHAIR_V_FORMULAZ/HelpDesk_Download/

See pages 1-37 & 1-38 of your motherboard manual to verify where your drives are connected.

 

[lpc1andonly]

If your Crucial RAID-0 array is connected to your ASMedia SATA ports (SATA6G_E1 or SATA6G_E2), then it's possible that you need to install the ASMedia SATA Controller Driver (version 2.0.8.0) in order for Windows to recognize the array.
https://www.asus.com/us/Motherboards/CROSSHAIR_V_FORMULAZ/HelpDesk_Download/

See pages 1-37 & 1-38 of your motherboard manual to verify where your drives are connected.

Thank you very much, i'm using, G1/G2. Should I use E1/E2? My OCZ 120GBs are working fine.

 

[Dereck47]

You can use E1/E2, but you'll have to create a new RAID-0 array.