Hello,
My build is unstable and I need some help please,
I upgraded... 1st time around and it was for the most part stable. I had some lag issues; when system was left to idle, system would not respond or the system would take forever to perform tasks, and hardware install issues; plug and play pick up and drop. Couple of blues Screens, I run a custome build over clocked and it is my first one so I expected this to happen.
So I decided to do a clean install
Wish I had not.
System Specs (BUILD):
Motherboar: Asus Maximus VII Formula
Processor: Intel i7-4770K
Memory: (part number)-G.Skill [TridentX] F3-2400C10D-16GTX
Graphics Card #1: SAPPHIRE R9 290 4GB GDDR5
Graphics Card #2: SAPPHIRE R9 290 4GB GDDR5
Sound Card: On board
Monitor: Toshiba 55L6200U
Storage #1: Kingston V300 240GB SSD
CPU Cooler: Corsair H80i - 4x Cooler Master SickleFlow 120
Case: Thermaltake UrbanS31
Power Supply: Corsair HX1050
OS: Windows 10 Pro
Accessory #1: Nippon Labs USB 2.0 Internal Memory Card Reader 3.5" All In One ICR-BB
Accessory #2: LG Black Blu-ray Disc Drive SATA Model UH12NS30 - OEM
I have updated motherboard BIOS and rolled them back.
I have manually downloaded new drivers from Asus & AMD websites for 64-bit operating system: Windows 10 as well as let Windows install threw the auto up date program, and full system lockup/crashed are consistent; lock-up none blue screen.
Regenal and language match. tch
System says Window is activated.
Ran admin command prompt sfc /scannow with no errors.
On
my probably 13 fresh install config., would really like some insight into what might be happening to cause these system lockup issues, reading and posting on forms from my smart phone isn't the funest thing to do.
Thank you for your time.
My build is unstable and I need some help please,
I upgraded... 1st time around and it was for the most part stable. I had some lag issues; when system was left to idle, system would not respond or the system would take forever to perform tasks, and hardware install issues; plug and play pick up and drop. Couple of blues Screens, I run a custome build over clocked and it is my first one so I expected this to happen.
So I decided to do a clean install
Wish I had not.
System Specs (BUILD):
Motherboar: Asus Maximus VII Formula
Processor: Intel i7-4770K
Memory: (part number)-G.Skill [TridentX] F3-2400C10D-16GTX
Graphics Card #1: SAPPHIRE R9 290 4GB GDDR5
Graphics Card #2: SAPPHIRE R9 290 4GB GDDR5
Sound Card: On board
Monitor: Toshiba 55L6200U
Storage #1: Kingston V300 240GB SSD
CPU Cooler: Corsair H80i - 4x Cooler Master SickleFlow 120
Case: Thermaltake UrbanS31
Power Supply: Corsair HX1050
OS: Windows 10 Pro
Accessory #1: Nippon Labs USB 2.0 Internal Memory Card Reader 3.5" All In One ICR-BB
Accessory #2: LG Black Blu-ray Disc Drive SATA Model UH12NS30 - OEM
I have updated motherboard BIOS and rolled them back.
I have manually downloaded new drivers from Asus & AMD websites for 64-bit operating system: Windows 10 as well as let Windows install threw the auto up date program, and full system lockup/crashed are consistent; lock-up none blue screen.
Regenal and language match. tch
System says Window is activated.
Ran admin command prompt sfc /scannow with no errors.
On
my probably 13 fresh install config., would really like some insight into what might be happening to cause these system lockup issues, reading and posting on forms from my smart phone isn't the funest thing to do.
Thank you for your time.