Sign in with
Sign up | Sign in
Your question

CPUID very high temp -> TMPIN2: 80 °C

Tags:
  • CPUs
Last response: in CPUs
Share
December 25, 2010 6:23:42 PM

Hi guys I just got done building my comp and got it up n running. Works very well so far. I checked the temps in cpuid and it showed every temp was low except for the tmpin2. I have very good air flow in my case so i was wondering if this is an error or something i need to take a look at. Any help is greatly appreciated!

> Hardware Monitoring : ITE IT8720F
> Processor Voltage : 1.02v
> VIN0 : 1.50v
> +3.3v Voltage : 3.34v
> +5v Voltage : 5.03v
> +12v Voltage : 12.48v
> +5v VCCH : 3.66v
> VBAT : 3.10v
> TMPIN0 : 30 °C
> TMPIN1 : 29 °C
> TMPIN2 : 80 °C
> FANIN1 : 985 rpm

> Processor AMD Phenom II X4 : Sensor DTS
> Core 1 : 31 °C
> Core 2 : 31 °C
> Core 3 : 31 °C
> Core 4 : 31 °C
> Energy Power : 20.50 W

> AMD Radeon HD 6800 Series : ATI Catalyst Driver
> Temperature : 37 °C
> Temperature (Diode) : 44 °C
> Fan : 1062 rpm
> Fan : 21.0%

> Hard Disk Monitoring : S.M.A.R.T
> Hard Disk SAMSUNG HD103SJ : 26 °C


Comp Specs:
> HDD : SAMSUNG Spinpoint F3 HD103SJ 1TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5"
> Mobo : Gigabyte GA-870A-UD3
> CPU : AMD Phenom II X4 955 Black Edition Deneb 3.2GHz 4 x 512KB L2 Cache 6MB L3 Cache Socket AM3 125W Quad-Core Processor HDZ955FBGMBOX
> RAM : G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL8D-4GBRM
> CASE : Antec Three Hundred Illusion Black Steel ATX Mid Tower Computer Case
> PSU : Antec NEO ECO 520C 520W Continuous Power ATX12V v2.3 / EPS12V 80 PLUS Certified Active PFC Power Supply
> Graphics card : SAPPHIRE 100315L Radeon HD 6850 1GB
> OP Drive : ASUS Black 24X DVD+R 8X DVD+RW 12X DVD+R DL 24X DVD-R 6X DVD-RW 12X DVD-RAM 16X DVD-ROM 48X CD-R 32X CD-RW 48X CD-ROM 2MB Cache SATA 24X DVD Burner - Bulk - OEM
> Network Card : TP-LINK TL-WN781ND IEEE 802.11b/g/n PCI Express Wireless Adapter Up to 150Mbps Wireless Data Rates 64/128-Bit WEP, WPA, WPA2

More about : cpuid high temp tmpin2

a c 913 à CPUs
December 26, 2010 12:28:47 PM

80°C is the north bridge temp it is normal for them to be hot. It looks to me that everything is fine.
m
0
l
December 26, 2010 11:36:02 PM

ok thank you
m
0
l
Related resources
a b à CPUs
December 27, 2010 4:01:24 AM

rolli59 said:
80°C is the north bridge temp it is normal for them to be hot. It looks to me that everything is fine.


Tell me how 80C for a NB is normal?
m
0
l
December 27, 2010 5:57:14 AM

so is this normal though? @amdfangirl for the NB to be that hot
m
0
l
a b à CPUs
December 27, 2010 9:02:33 AM

Shouldnt be normal..
m
0
l
a b à CPUs
December 27, 2010 9:48:16 AM

It's not, water boils at 100C, 80C is damn hot. Put a small fan on it.
m
0
l
a c 172 à CPUs
December 27, 2010 1:48:39 PM

80 C was normal for an overclocked nVidia 680i MCP. That and lack of Yorkfield support was why I shifted to Gigabyte motherboards a few years ago.

I agree with amdfangirl. 80 C for a northbridge - well, the amd equivalent - is hot. About the only thing that should be running at 80 C is the GPU.

BTW, nice picture. Best one yet.
m
0
l
December 29, 2010 7:23:24 PM

system temp runs around 35-40 C and gpu runs around 40-50 C and cores run aroung 30-40 C.
i have an antec 300 case which has 2 front fans, 1 rear fan, and 1 top fan. i have a amd phenom ii x4 955 and using the stock heat sink. what fan do you suggest i get to decrease the NB temp?
m
0
l
a b à CPUs
December 30, 2010 12:17:41 AM

just put any fan on the northbridge. Nothing fancy, you're just getting rid of ~18W of TDP.

Any random fan should do it.
m
0
l
!