Budget PC build - advice for improvements - Does this mobo support this RAM?

[regalzo]

Hello,

I'm building an everyday desktop PC for some normal 1080p gaming and regular use.
However I am planning on running this PC with 2 to 3 monitors when not playing, is there something specific to think about when running with multiple monitors?

Case: Bitfenix Nova (ATX) - 35 €
CPU: Intel i3 6100 (skylake) - 133 €
GPU: R9 380 4GB OC - 235 €
RAM: ADATA 8GB premier DDR4 2133MHz U-DIMM - 50 €
MOBO: Asus H110M-A, LGA1151, Intel H110, DDR4, mATX - 75 €
PSU: Seasonic 520W S12II-520 ATX-virtalähde, 80 Plus Bronze - 69 €
STORAGE: KINGSTON 240GB HYPERX FURY SSD 2.5 - 80€

Reason why I have no HDD in there is because I have some old ones I can use.

Total = 677€

I would like to know your opinion before i order if there is something I should change.

EDIT: I changed the SSD to a bigger size but I am going to stick with kingstone because of its cheap price, changed the PSU to a tier 2!

Not sure if I should make a new thread for this but I would also like to know if these components are compitible with eachother. I am quite sure about the all the parts exept for the mobo and ram.

Memory
2 x DIMM, Max. 32GB, DDR4 2133 MHz Non-ECC, Un-buffered Memory *1
Supports Intel® Extreme Memory Profile (XMP)
* Hyper DIMM support is subject to the physical characteristics of individual CPUs.
* Refer to www.asus.com for the Memory QVL (Qualified Vendors Lists).
* The maximum memory frequency supported varies by processor.

That is what is stated in the description for the mobo. Is it compatible with
"ADATA 8GB premier DDR4 2133MHz U-DIMM"?

Thanks in advance!
Regalzzz

 

[logainofhades]

PSU is not that great, nor is the SSD, in both storage size and quality. I would change the PSU to a tier 1 or tier 2 unit. http://www.tomshardware.com/forum/id-2547993/psu-tier-list.html
SSD I would go 240gb minimum, in Crucial, Sandisk, or Samsung.

 

[regalzo]

PSU is not that great, nor is the SSD, in both storage size and quality. I would change the PSU to a tier 1 or tier 2 unit. http://www.tomshardware.com/forum/id-2547993/psu-tier-list.html
SSD I would go 240gb minimum, in Crucial, Sandisk, or Samsung.

I updated the SSD and PSU I did aswell update my thread, do you know if the ADATA DDR4 is compatible with my mobo?

 

[logainofhades]

Since it is 2133 ram, I see no reason whey it shouldn't work.

 

[regalzo]

Since it is 2133 ram, I see no reason whey it shouldn't work.

Okay thanks, I just found out that ASUS have their own list of Qualified Vendors List (QVL). ADATA was listed there aswell but not that specific RAM card but I am pretty sure it would work however I chose to go with a corsair instead which was about the same price since it was listed there. I wanna be 100% Thanks for your answers.

 

[madmatt30]

The adata would IMO be fine but if you want to go crucial fair enough.
Build is good mate IMO , no problem with anything there.the fury is still a decent ssd.

 

[regalzo]

The adata would IMO be fine but if you want to go crucial fair enough.
Build is good mate IMO , no problem with anything there.the fury is still a decent ssd.

Okay, thanks yea I think this setup is good performance for they money.