driver power state failure windows 10 - I can go to the safe boot after updete from 15.12.2015 pls help

ThomasWki

Reputable
Dec 17, 2015
1
0
4,510
After update from 15.12.2015 a can't open windows 10 - driver power state failure windows 10 i can't go to safe boot when I chose it after a few minutes computer shut down himself. Pls help. Thomas
 
Solution
Hi,

Please do try these troubleshooting steps that may help in solving the issue.
- Start with a hard reset first, unplug your PC from the wall if it's a desktop then press and hold the power button for 20 seconds then try booting it up.
- If it doesn't boot and since you've already tried loading Safe Mode and it didn't work your last resort would be to run a complete factory reset with your PC using a disc.
Hi,

Please do try these troubleshooting steps that may help in solving the issue.
- Start with a hard reset first, unplug your PC from the wall if it's a desktop then press and hold the power button for 20 seconds then try booting it up.
- If it doesn't boot and since you've already tried loading Safe Mode and it didn't work your last resort would be to run a complete factory reset with your PC using a disc.
 
Solution