Monitor not receiving any signal

[PhilGS]

Motherboard: GA-Z97X-SLI

Hello, recently, I decided to reset my computer. Using windows 10 it gave me two options. I chose the one that only takes a couple of seconds. After that, the light on my tower was on and the fans were still turning, but the monitor stopped receiving a signal. I tried taking the RAM out, taking the CMOS battery out, waited a little over 30 seconds, and put it back in. Nothing worked. Any ideas on how to help me out would he greatly appreciated.

Thanks.

 

[alexoiu]

Have you tested without graphics card? Is a case speaker http://www.newegg.com/Product/Product.aspx?Item=N82E16812201032 connected to the motherboard?

 

[PhilGS]

Have you tested without graphics card? Is a case speaker http://www.newegg.com/Product/Product.aspx?Item=N82E16812201032 connected to the motherboard?

Tested it without a graphics card, same thing comes up on my screen; no signal. There's not a case speaker connected to the motherboard.

 

[PhilGS]

Have you tested without graphics card? Is a case speaker http://www.newegg.com/Product/Product.aspx?Item=N82E16812201032 connected to the motherboard?

My bad,windows loaded up. Resolution's incorrect but that's ok.

 

[alexoiu]

You can install the Intel graphics driver for correct resolution.
Try testing the card in different PC, or RMA it.