How does my first gaming rig look?

[Criseon]

I'm planning to buy my first gaming rig soon. I was wondering if any improvements could be made regarding the parts.

Parts list:
http://pcpartpicker.com/p/bZys99
Case: Sharkoon VG4-W (Blue)

Thanks in anticipation!

 

[Sergeant_Sneaky]

Looks like a nice build, although I'm not sure the hyper will fit in that case, their site says it is 159mm and the case has a max of 160mm, which is going to be very close assuming both measurements are spot on. I would recommend the EVGA G2 650w PSU for around $100, if you can stretch to it as it is of higher quality. What is your budget for a case, if you don't want to risk it not fitting?

 

[Criseon]

Looks like a nice build, although I'm not sure the hyper will fit in that case, their site says it is 159mm and the case has a max of 160mm, which is going to be very close assuming both measurements are spot on. I would recommend the EVGA G2 650w PSU for around $100, if you can stretch to it as it is of higher quality. What is your budget for a case, if you don't want to risk it not fitting?

Thanks for answering so quickly!
I'll look into that PSU, because I'll be mildly overclocking my CPU and GPU.
Would it be an option to replace the 212 EVO with a Cooler Master Hyper 103?
If not, my budget for a case is ~50 bucks.

 

[Sergeant_Sneaky]

Two cases I have found on Newegg for around $50 were the Deepcool DUKASE and the Deepcool TESSERACT, they both claim to fit the Hyper 212, I don't know what your needs are within a case but you can give those a look. The Hyper 103 has a smaller fan and lower TDP which means it won't cool as well as the 212 and will be a bit louder, it's up to you if you'd rather swap the cooler but I wouldn't recommend it. Also, if you purchase a case that can fit the hyper 212, it will be more "future proof" if you decide to get a bigger cooler later on.