Shut off windows during a pc reset, now I've got problems when I start pc

[Scarecrowffs]

Hey all!

I was doing a PC reset and it got stuck at 2%, so after reading around other people's experiences with that I heard that we can cancel it and try something else. But since I didn't find anyway to cancel it, I forced my pc to shut down.
It was a very dumb move, because now my pc loads up halfway through, shuts down, loads up again, shuts down, and on and on.
I did this on my SSD, and I was wondering if there's something I can do to get it back so I can use it again.

 

[clutchc]

If you have the Windows installation disk, it has a Win repair option you can try.

 

[Scarecrowffs]

Unfortunately, I don't have it.
Is there anything else I can do?

 

[clutchc]

Unfortunately, I don't have it.
Is there anything else I can do?

If you have a legit copy of Windows, you can download the installation disk .ISO file and burn yourself a new installation disk. https://www.microsoft.com/en-us/software-download/home

 

[Scarecrowffs]

I'm not very good with this kind of thing, and I don't want to screw up again. Do you know where I can find a step by step guide?

 

[clutchc]

I'm not very good with this kind of thing, and I don't want to screw up again. Do you know where I can find a step by step guide?

Guide for what? Making a DVD from an .ISO file?

 

[Scarecrowffs]

Sorry if that was a dumb question. But yeah, I've never done it before. I wouldn't really know where to start.

 

[clutchc]

If you will be using Win to burn the DVD, simply double-click on the .ISO file and Win will direct you to burn the DVD. All automatically.

But if you still want a "how to"... https://technet.microsoft.com/en-us/magazine/dd451080.aspx

 

[Scarecrowffs]

Hey, thanks for helping me.
I used the Microsoft tool and downloaded the Windows 10 ISO on my USB.
I've inserted the USB into the computer, chose the "HUAWEI Mass Storage 3.21" as the primary boot and saved. It reloads and I get the "Reboot and select proper boot device ..." and that's as far as I went. Am I doing something wrong?

 

[clutchc]

You can't use the ISO file as-is. You have to either burn it to disk or use the Microsoft tool to create a bootable USB flash drive from it. Then you have to be sure your PC boots from a flash drive when it sees one in the USB port.

 

[Colif]

this should help: http://wccftech.com/create-bootable-windows-10-usb-flash-drive/

Just trying to help

 

[Scarecrowffs]

You can't use the ISO file as-is. You have to either burn it to disk or use the Microsoft tool to create a bootable USB flash drive from it. Then you have to be sure your PC boots from a flash drive when it sees one in the USB port.

Oh yes, I created the bootable flash drive using the tool, and not ISO, sorry about that!
When PC boots up and I go to BIOS, I see 'HUAWEI Mass Storage 3.21' and 'HUAWEI SD Storage 3.21'
None of them seem to be working. Might try the Rufus method if all fails.

 

[Scarecrowffs]

this should help: http://wccftech.com/create-bootable-windows-10-usb-flash-drive/

Just trying to help

Thank you!
Except I'm having problems when trying to boot from the USB. I did everything as mentioned in the video.