Connect router to Aruba WiFi access point.

[alli2e45]

Long Story short.
In my room there is a Ethernet cable that is currently connected to Aruba WiFi access point. model says APIN0205. My goal is to get cable connection to laptop. What I want to do:

Connect Ethernet cable to router.
Connect said router to Aruba device and one or more laptops

Can this be done? Can I get a cabled connection with such manipulations? If so, will there still be WiFi signal?

If this description is not enough, here is an illustration

 

[Ralston18]

Should be doable if you have the necessary network and router access rights.

As I understand your intent the green wire (from a router or switch) should go to a LAN port on your room router as will both blue wires.

Aruba should have a static IP, your network submask, and have DHCP turned off.

Start with this tutorial from within this forum:

http://www.tomshardware.com/faq/id-1859922/set-repeater-home.html

There are other such tutorials and there should be direct guidance via the Aruba User Guide/Manual.