Solved

Multiple errors windows 10

Alright so im running an older laptop with windows 10. Currently has an AMD A6 3400M, 6gb ram, and a corsair 60gb ssd. So far ive ran into issues with booting up the computer as it BSOD's and gives me the error Unexpected_Store_Exception. As well when I close the lid of the laptop to put it to sleep and re open it everything freezes and BSOD's and I will get the error Critical_Data_Error. I dont know whats happening as I'm a complete noob at windows stuff so any help would be awesome
18 answers Last reply Best Answer
More about multiple errors windows
  1. how long have you had win10 installed?i found that once it got a few updates in it became a lot more stable.
  2. Or if you have McAfee AV, install the latest version: http://windowsreport.com/unexpected_store_exception-bsod-windows-10/

    download this: http://www.resplendence.com/whocrashed its free for home users
    Install it and run a scan - it looks at the error logs and gives you the results in a readable form
    It might tell you what problem is, if its not obvious paste the results in here.
  3. aldan said:
    how long have you had win10 installed?i found that once it got a few updates in it became a lot more stable.

    I was using windows 10 for a few months before and had the same errors but didnt bother to fix them as i switched over to open suse for a few months, but i decided to come back to windows cause my school work all revolved around windows only applications
  4. Colif said:
    Or if you have McAfee AV, install the latest version: http://windowsreport.com/unexpected_store_exception-bsod-windows-10/

    download this: http://www.resplendence.com/whocrashed its free for home users
    Install it and run a scan - it looks at the error logs and gives you the results in a readable form
    It might tell you what problem is, if its not obvious paste the results in here.


    Crash dump directory: C:\WINDOWS\Minidump

    Crash dumps are enabled on your computer.

    On Mon 2016-03-28 3:38:25 PM GMT your computer crashed
    crash dump file: C:\WINDOWS\Minidump\032816-17296-01.dmp
    This was probably caused by the following module: hdaudbus.sys (HDAudBus!HdaController::RestoreRegisters+0x261)
    Bugcheck code: 0x7A (0xFFFFC000121D17B0, 0xFFFFFFFFC000000E, 0x13286C860, 0xFFFFF801F9812521)
    Error: KERNEL_DATA_INPAGE_ERROR
    file path: C:\WINDOWS\system32\drivers\hdaudbus.sys
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    description: High Definition Audio Bus Driver
    Bug check description: This bug check indicates that the requested page of kernel data from the paging file could not be read into memory.
    The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.


    On Mon 2016-03-28 5:47:27 AM GMT your computer crashed
    crash dump file: C:\WINDOWS\Minidump\032716-40921-01.dmp
    This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
    Bugcheck code: 0x154 (0xFFFFE001FE224000, 0xFFFFD0013BE237D0, 0x0, 0x0)
    Error: CUSTOM_ERROR
    The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

    thats the log, but i dont make any sense out of any of it
  5. Quote:
    The error code KERNEL_DATA_INPAGE_ERROR STOP: 0x0000007A states that the requested page of kernel data from the paging file could not be read into memory. It appears that there are some issues with the hard disk.
    Use check disk command for any errors on hard disk -
    Warning: Microsoft does not recommend interrupting the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. For safety you can back up your data before using the check disk command.
    Use the check disk commands as follows:
    1. Click Start.
    2. In search window type 'cmd' and ENTER. Right click and select 'Run as administrator'.
    3. Type at the command prompt CHKDSK /P and press ENTER to scan the disk.
    4. Then type CHKDSK C: /F /R and press ENTER to repair corrupt sectors, if there are any.
    NOTE: The root drive has to be C: and the command may schedule a task at the system startup, if it does, then press Y to schedule a task and restart the computer to perform chkdsk.
    Once chkdsk completes, boot to the desktop and then check.


    http://answers.microsoft.com/en-us/windows/forum/all/blue-screen-with-this-error-code/03276fa2-6dcb-44d0-a778-499d5d00b65d?auth=1

    run that, it can't hurt.

    the error appears to have been caused by your audio drivers, see if you can find newer ones.

    Unexpected store exception and the top one both point at your hard drive, It could be the SSD, I can't find newer versions of this though: http://www.corsair.com/en/blog/2013/may/the-corsair-ssd-toolbox
  6. How did you do your upgrade to Windows 10, was Windows 10 clean installed? If you tried to just update windows 7 or 8 to Windows 10 without doing a full format / clean install you could have file and driver fragments left over from your previous Windows effecting the performance of Windows 10. I would recommend the easiest, best first step would be to do a full clean install of Windows 10 and then see if you still have any problems.
  7. I can't argue with a fresh install, solves most errors.
  8. Redneck5439 said:
    How did you do your upgrade to Windows 10, was Windows 10 clean installed? If you tried to just update windows 7 or 8 to Windows 10 without doing a full format / clean install you could have file and driver fragments left over from your previous Windows effecting the performance of Windows 10. I would recommend the easiest, best first step would be to do a full clean install of Windows 10 and then see if you still have any problems.

    The thing is it is a clean install since i was moving away from open suse i took the ssd out ran it throught diskpart and formatted it
  9. Colif said:
    Quote:
    The error code KERNEL_DATA_INPAGE_ERROR STOP: 0x0000007A states that the requested page of kernel data from the paging file could not be read into memory. It appears that there are some issues with the hard disk.
    Use check disk command for any errors on hard disk -
    Warning: Microsoft does not recommend interrupting the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. For safety you can back up your data before using the check disk command.
    Use the check disk commands as follows:
    1. Click Start.
    2. In search window type 'cmd' and ENTER. Right click and select 'Run as administrator'.
    3. Type at the command prompt CHKDSK /P and press ENTER to scan the disk.
    4. Then type CHKDSK C: /F /R and press ENTER to repair corrupt sectors, if there are any.
    NOTE: The root drive has to be C: and the command may schedule a task at the system startup, if it does, then press Y to schedule a task and restart the computer to perform chkdsk.
    Once chkdsk completes, boot to the desktop and then check.


    http://answers.microsoft.com/en-us/windows/forum/all/blue-screen-with-this-error-code/03276fa2-6dcb-44d0-a778-499d5d00b65d?auth=1

    run that, it can't hurt.

    the error appears to have been caused by your audio drivers, see if you can find newer ones.

    Unexpected store exception and the top one both point at your hard drive, It could be the SSD, I can't find newer versions of this though: http://www.corsair.com/en/blog/2013/may/the-corsair-ssd-toolbox

    The problem is the unexpected store exception has been occurring even before i put the ssd into the system. On the original drive it came with it kept coming up with the same error
  10. correction: no, corsair software doesn't work with win 10,.. i can't read

    What model laptop is it?
  11. Colif said:
    It seems that SSD tool does work on Windows 10 so might want to test drive and see what it says.

    What model laptop is it?

    Currently updating the fireware
    Uh its a pavillion g6
  12. I wonder if the errors are caused by motherboard drivers. It could be the hard drive controllers, since same error happened on two different drives

    http://support.hp.com/us-en/product/HP-Pavilion-g6-Notebook-PC-series/5330578/model/5358786/drivers might want to let this scan for drivers

    TRIM commands won't work in 10 through software as Win 10 does it auto anyway.
  13. Colif said:
    I wonder if the errors are caused by motherboard drivers. It could be the hard drive controllers, since same error happened on two different drives

    http://support.hp.com/us-en/product/HP-Pavilion-g6-Notebook-PC-series/5330578/model/5358786/drivers might want to let this scan for drivers

    TRIM commands won't work in 10 through software as Win 10 does it auto anyway.

    Ill check that out, the firmware updates failed tho so
  14. Colif said:
    I wonder if the errors are caused by motherboard drivers. It could be the hard drive controllers, since same error happened on two different drives

    http://support.hp.com/us-en/product/HP-Pavilion-g6-Notebook-PC-series/5330578/model/5358786/drivers might want to let this scan for drivers

    TRIM commands won't work in 10 through software as Win 10 does it auto anyway.

    The HP support solution also dosent work theres an error WIndows Service Start Failure
  15. did you try option 2? (on hp site)
    on next page it probably see you have win 10 and show no drivers, choose change and choose Win 8. These will work in 10.. i would look at the bios too - it says Intel though so um?.Is that the right model? get everything that might be handy. The drivers are all from this year,
  16. Colif said:
    did you try option 2? (on hp site)
    on next page it probably see you have win 10 and show no drivers, choose change and choose Win 8. These will work in 10.. i would look at the bios too - it says Intel though so um?.Is that the right model? get everything that might be handy. The drivers are all from this year,

    No i dont think its the right model as mine is amd i'll do a search around the site
  17. Colif said:
    did you try option 2? (on hp site)
    on next page it probably see you have win 10 and show no drivers, choose change and choose Win 8. These will work in 10.. i would look at the bios too - it says Intel though so um?.Is that the right model? get everything that might be handy. The drivers are all from this year,

    So far no drivers could be found on the HP site i however will try to update the audio drivers
  18. Best answer
    I assume you never changed the CPU, so this should be your model: http://www.cnet.com/products/hp-pavilion-g6-1c58dx-15-6-a-series-a6-3400m-windows-7-home-premium-64-bit-4-gb-ram-500-gb-hdd/specs/

    If it is, this is the actual driver page for your laptop: http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g6-Notebook-PC-series/5145708/model/5193780

    same as before, choose option 2, and swap the operating system language from Win 10 to Win 8 & update (Or not, as my link may take you right here). The BIOS is for AMD so I pretty sure this is yours now. Grab all the things. The Sound drivers may be older than the ones you were going to use, they all appear to be dated March this year though.

    I had been awake 22 hours when we last talked so I wasn't thinking very well or I would have thought to search for a HP with your CPU before now
Ask a new question

Read More

RAM HP Laptop AMD Laptops windows 10 SSD Blue Screen