Pc on but no display no beeps nothing ...

[Anonymous_6]

Well today i mounted my liquid cooler AIO .. after i checked evrything out i tryed to power up my system, the pc beeped then poped up a comus menu asking to set the settings to default or load last good start. I pressed default settings... started up again secund time menu shows up i pressed same thing. After that i decided to remove the small battery from the mobo . Pressed the power button and the little speaker beeps out 4 or 5 times still no display . So i dont konw what to maybe my mobo died cpu or gpu ?
Note evrything powers up fans etc but no screen display
Specs:1tb samsung hardrive
Ram:8gb
Cpu:amd phenom II black edition 1090t x6 not oc
Gpu:asus stirx 750ti 4b ddr5
Psu:800 w
Mobo: am3 gigabyte (dont recall the name)
Cpu cooler malestrom 120t

Sry for typos

 

[trampus123]

you may want to remove the ram and reseat it.
If that do not work find the clear cmos jumper or switch I think its called a clear mem button in a giga MB

 

[Hlsgsz]

Well today i mounted my liquid cooler AIO .. after i checked evrything out i tryed to power up my system, the pc beeped then poped up a comus menu asking to set the settings to default or load last good start. I pressed default settings... started up again secund time menu shows up i pressed same thing. After that i decided to remove the small battery from the mobo . Pressed the power button and the little speaker beeps out 4 or 5 times still no display . So i dont konw what to maybe my mobo died cpu or gpu ?
Note evrything powers up fans etc but no screen display
Specs:1tb samsung hardrive
Ram:8gb
Cpu:amd phenom II black edition 1090t x6 not oc
Gpu:asus stirx 750ti 4b ddr5
Psu:800 w
Mobo: am3 gigabyte (dont recall the name)
Cpu cooler malestrom 120t

Sry for typos

If your MB has integrated graphics it may be defaulting to that and not your discrete gpu. Hook up th eport on the MB to your monitor, go in the bios and set the priority to PCIE(the exact formulation depends on your bios, but you'll figure it out.

 

[Anonymous_6]

Ok ill remove the ram and check back

 

[Anonymous_6]

I dont think it haz intregraded graphics since it is from 2011 :/

 

[Hlsgsz]

I dont think it haz intregraded graphics since it is from 2011 :/

There were integrated graphics back then too, just not on the cpu. Check teh connectors on the back, and yeah, reseating you ram and checking the DC cables is always thisn to do with these things.

 

[Anonymous_6]

I dont have any conector to conect my screen in only in my gpu .. this is a new gpu so :/