Base System Device error I can't resolve

[mojoroc]

Latest Win 10
MOBO: Gigabyte GA-X99P-SLI (update utility doesn't find any updated drivers)

In my Device Manager, it lists Other devices -> Base System Device as having no driver. The properties then says the Location is PCI Slot 2 (PCI bus 4, device0, function0) and its status is "The drivers for this device are not installed. (Code 28)
There are no compatible drivers for this device.
To find a driver for this device, click Update Driver."

A little digging also tells me Hardware IDs are:
PCI\VEN_8086&DEV_1577&SUBSYS_11112222&REV_00
PCI\VEN_8086&DEV_1577&SUBSYS_11112222
PCI\VEN_8086&DEV_1577&CC_088000
PCI\VEN_8086&DEV_1577&CC_0880

When I go to pcidatabase.com, I can see the vendor as Intel (no surprise) but nothing meaningful for the device ID. Also, I have had Intel scan for updates needed for my chipset, and nothing is found. I am totally stumped and could use some help.

 

[thx1138v2]

I'm not absolutely sure about this but check it out.
"GIGABYTE X99P-SLI World's First Intel® Thunderbolt™ 3 Certified X99 Motherboard"
dev_1577 appears to be the Thunderbolt port
https://devid.drp.su/?dev=PCI\VEN_8086%26DEV_1577&l=en

Is it safe?
http://www.sevenforums.com/drivers/269008-driverpack-solution-safe.html

Or if you're not using the Thunderbolt port just ignore it.

 

[mojoroc]

Thank you for the quick reply thx1138... I dont currently plan on using Thunderbolt, and so am leaning towards leaving it alone - you sure there is no adverse impact of leaving one of these things as a missing device?

 

[thx1138v2]

As I said in my 1st post, no, I'm not absolutely sure.

You might look around in the BIOS and see if there is a way to disable the Thunderbolt port. Failing that, look for a way to disable it in either device manager.

 

[Colif]

Do you have a card reader? Base system devices seem to be card readers.