First time booting up No display and GPU shuts off after 2 seconds

[Ethanowl]

I just completed my first full build and when I turn it on all the fans boot up, the Red LEDs light up on the motherboard come on, that code flash through in the motherboard's Debug LED, the reset button works, the optical disc drive works, but Nothing comes up on my display and after 2 seconds after turning on the computer the GPU's fans shut off, but everything else remains on.

Everything in this system is brand new.

I have taken all the cables out and pluged them back in.

I have remove and reinserted both the graphics card and ram.

I have tried just one ram at a time. Checked my monitor multiple times and it works.

I have been plugging the monitor in using the HDMI port on the motherboard.

Please help!!!

Here is my full build:
•CPU: Intel Core i7-6700K 4.0GHz Quad-Core Processor
•Cooler Master Hyper 212 EVO 82.9 CFM Sleeve Bearing CPU Cooler
•Motherboard: MSI Z170A GAMING M5
•Graphics Card:EVGA GeForce GTX 970 4GB FTW+ ACX 2.0+ Video Card
•RAM:G.Skill Ripjaws V Series 16GB (2 x 8GB) DDR4-2400 Memory
•Samsung 850 EVO-Series 500GB 2.5" Solid State Drive
•Western Digital BLACK SERIES 2TB 3.5" 7200RPM Internal Hard Drive
•Phanteks Enthoo Pro ATX Full Tower Case
•EVGA 850W 80+ Gold Certified Fully-Modular ATX Power Supply
•TP-Link TL-WDN4800 802.11a/b/g/n PCI-Express x1 Wi-Fi Adapter

 

[maxwellmelon]

have you gone though this thred---http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems-- strongly recommend it and covers most common test including bench test

 

[Ethanowl]

Sorry I didn't mean to vote that down I will take a look at it, but do you think it could be a bad motherboard?

 

[maxwellmelon]

sorry but I just noticed "I have been plugging the monitor in using the HDMI port on the motherboard." with the add in card you installed you need to plug the monitor into the add in card not the motherboard.

Also what is the final debug code stop at?

 

[Ethanowl]

So I should plug it into the graphics card rather than the HDMI port on the motherboard? Would that be why the graphics card is shutting off a few seconds after I turn on the computer?

Idk the debug code changes every time sometimes it will stop on what I thought was just a real time temperature reading at fluctuating between 47-48.

Other times it will stop on A6 or A9.

 

[Ethanowl]

All I had to do was plug into the graphics I am so dumb! Woot woot!!!! It's alive I built it right!!!!

 

[maxwellmelon]

your welcome. i was rereading it and i noticed how you said that got my attiion