Please I need help errors in port 0

[MSeraphine]

Lately my computer has had a few issues and I really need help I'm writing this from my tablet. I have had a few issues my port 0 had an error occurred failure and I got a bsod system service exception. I'm running Windows 10. Can't get any other info from it at the moment

 

[Colif]

Was this the error: AHCI port 0 device error

This AHCI device error was generated from the BIOS' S.M.A.R.T. detection. It has absolutely nothing to do with your operating system. At the time you see this error message, the operating system has not been yet started. S.M.A.R.T. has detected that your hard drive at port 0 is faulty and the drive may or may not be accessible. Your hard drive may fail any time once this happened. If you're lucky, press F1 will boot your operating system. Back up your files and replace your drive immediately!

http://answers.microsoft.com/en-us/windows/forum/all/boot-menu-error-ahci-port-0-device-error/0e21b6c4-71ba-47de-a836-2677fcfaca33

 

[MSeraphine]

Was this the error: AHCI port 0 device error

This AHCI device error was generated from the BIOS' S.M.A.R.T. detection. It has absolutely nothing to do with your operating system. At the time you see this error message, the operating system has not been yet started. S.M.A.R.T. has detected that your hard drive at port 0 is faulty and the drive may or may not be accessible. Your hard drive may fail any time once this happened. If you're lucky, press F1 will boot your operating system. Back up your files and replace your drive immediately!

http://answers.microsoft.com/en-us/windows/forum/all/boot-menu-error-ahci-port-0-device-error/0e21b6c4-71ba-47de-a836-2677fcfaca33

Well I haven't had a BSOD as of lately but I still see the RAID 0 has an error occurred message after it.

 

[Colif]

RAID 0 has an error occurred << that isn't message i looked for, i searched for port 0 and now its raid 0?

does screen look like this? http://superuser.com/questions/956113/repair-raid-after-bad-suspension-error-occurred-0

cause the solution offered may help you.

as for the BSOD, can you do this:

Can you follow option one here: http://www.tenforums.com/tutorials/5560-bsod-minidump-configure-create-windows-10-a.html
and then do this step below: Small memory dumps - Have Windows Create a Small Memory Dump (Minidump) on BSOD

that creates a file in c/windows/minidump
copy that file to documents
upload the copy from documents to a cloud server and share the link and someone help you fix it

 

[MSeraphine]

yes but under the RAID Volume under the status it says error occured, but I'm on the laptop in question right now

 

[Colif]

Like the 1st problem I mistakenly searched for, this can mean a drive is failing. it can also mean it needs a firmware update, or the cable isn't connected properly.

If you do have raid then you might have to break array to properly test the drives as sometimes they report wrong SMART scores. You can't do that without losing data so I would back up data first. I also not an expert or know very much at all about RAID so will add extra tags to post and see anyone else has a smarter idea

have a look here: https://communities.intel.com/thread/76538