Windows 10 64-bit installing Problem

[hamid_alizadeh]

Hello Guys
Recently I bought a Xeon E5450 processor and a GIGABYTE EP43T-S3L Mainboard. I wanted to install 64-bit windows 10, but the system stuck in windows 10 logo. after that, I installed a 32-bit version without problem. the problem is my CPU is 64-bit based on what intel says. I don't know what is the problem. Please help me. Cause I have 8 GB of memory and I can't use half of it.
Thanks a lot

Main-board: GIGABYTE EP43T-S3L
CPU: Xeon E5450
Ram: Corsair 8 GB 2000 MHz CMX8GX3M2A2000C9
Sapphire ATI Radeon HD 4890
Cooler Master 460W

 

[Colif]

I wouldn't put Win 10 on that motherboard, it doesn't have any Win 10 or win 8 drivers so you going to be in a world of pain. Most I would put on that is Win 7

Rev 1.4 and 1.3 are the same, highest driver support is win 7. http://www.gigabyte.com.au/products/product-page.aspx?pid=3596#dl

 

[hamid_alizadeh]

I wouldn't put Win 10 on that motherboard, it doesn't have any Win 10 or win 8 drivers so you going to be in a world of pain. Most I would put on that is Win 7

Rev 1.4 and 1.3 are the same, highest driver support is win 7. http://www.gigabyte.com.au/products/product-page.aspx?pid=3596#dl

I don't have any problem with the drivers, I use softwares like driver easy and It find all drivers like peace of cake.
Thanks for the suggestion

 

[kombivan]

Try droping your memory clock back a setting or two to see if the install will continue that is what fixed mine, memory is in the bios in the memory configuration section. The reason the 32bit installed is because it will only run up to 4gb ram with a 32bit windows.