Hi guys - so I'm new to the OC-scene, and I have a question regarding GPU power usage. I have a Asus Strix GTX 1080, and I've been using EVGA Precision X for my OC. I have reached a stable OC with 200mhz offset and power target set at 120%, temp target at 92 degrees. The voltage-bar is set to 100%. Under full load in Valley benchmark the power usage fluctuates between 110-118% where it hits the power limit. It also hits voltage limit, but temperature is stable at around 77 degrees and fan at 63% speed. I ran Valley over night and then Furmark for 9 hours, and the GPU clock settles at 2088mhz, so I'm pretty happy (for now...).
My question is this: When I revert back to default settings in EVGA Precision and don't touch anything, the graphics card still uses around 100% power on full load, sometimes up to 105% where it hits power limit. Everything else seems fine, the GPU clock stays at 1873mhz with temp. at 73 degrees, fan at 57% speed. I've watched youtube-vids of people OCing and their power usage usually hovers around 80% before OC after which it ramps up to over 100%, up to 120% as expected. So is it normal that the card hits power limit before OC? With 6+8 pin power cables I would think that the card didn't hit 100% when not being overclocked. Any thoughts?
The rest of my setup:
MSI Z170A Gaming pro carbon
i7 6700k OC to 4,5ghz
16gb HyperX Fury DDR4 2400mhz
Corsair CX750M 750w PSU
Samsung PM951 SSD 512GB PCIe
My question is this: When I revert back to default settings in EVGA Precision and don't touch anything, the graphics card still uses around 100% power on full load, sometimes up to 105% where it hits power limit. Everything else seems fine, the GPU clock stays at 1873mhz with temp. at 73 degrees, fan at 57% speed. I've watched youtube-vids of people OCing and their power usage usually hovers around 80% before OC after which it ramps up to over 100%, up to 120% as expected. So is it normal that the card hits power limit before OC? With 6+8 pin power cables I would think that the card didn't hit 100% when not being overclocked. Any thoughts?
The rest of my setup:
MSI Z170A Gaming pro carbon
i7 6700k OC to 4,5ghz
16gb HyperX Fury DDR4 2400mhz
Corsair CX750M 750w PSU
Samsung PM951 SSD 512GB PCIe