AMD A8 7600 on asus a88xm-e motherboard

[mikiFrajer]

Hello all,

here is my setup:

AMD A8 7600 processor
Asus A88XM-E motherboard
AMD Radeon R9 2x4 GB on 2133 MHz
kinston hyper fury 120 GB SSD
fortron hexa plus 400W, 80+
Coolermaster TX3 EVO

I would like to know how to setup my BIOS to get processor work on 3,8 GHz whole time while memory gets to work on 2133 MHz. I see some options in AI tweaker but dunno what to increase.
Version of BIOS is 0304-latest.

THX all in advance.

 

[TechyInAZ]

You'll have to mess with the base clock in order to overclock the A8 APUs.

What your going to need to do is underclock your RAM temporarily because when you adjust your BCLK it affects your CPU and memory clock speeds. We want to first make sure the CPU is stable.

Next, make sure the BCLK x CPU multiplier = CPU Clock speed. Keep adjusting the BCLK until you hit roughly 3.8ghz.

Next, Run a stress test in windows. If it's unstable, add 0.010v of voltage to the APU and keep doing that until stable for an hour with OCCT or Prime95 (whatever one you perfer).

Next, up your memory to default speeds then stress test again.

 

[mikiFrajer]

hello,

ive been watching some videos and i saw here https://www.youtube.com/watch?v=UA6PwOXCr98 that this guy has an option to boost GFX engine clock and to set MAX TDP power to 65 W. I entered my BIOS and i could change my integrated graphics VRAM memory to 2 GB and to set memory speed to 2133 MHz but nothing else. I would like to boost my CPU to max 65 W and Integrated graphic clock to the max cause i have enough power and a good vent but dunno how to do it or even where to do it.

I opened radeon settings and i saw this https://i.imgsafe.org/70d1b7f9eb.jpg . IS this a max clock for this integrated graphic? btw. CPU-Z is showing this https://i.imgsafe.org/70dbcc8cb3.jpg