I've been getting numerous BSOD crashes, maybe one or two a day, 9/10 of them being SYSTEM_SERVICE_EXCEPTION. But today I also got one saying REGISTRY_FILTER_DRIVER_EXCEPTION, saying that farflt.sys failed.
I got this most recent one right after booting.
I recently did a clean reset of Windows 10 onto my new SSD after cloning my old drive, so I'm surprised that I'm getting these bsod's. I've tried chkdsk /f /r, I've tried Sfc /scannow, I've run scans on MalwareBytes, I've used CCleaner, I've disabled my webcam, and I've tried WhoCrashed.exe to try and look at the dump files in the ...\Minidump folder, but ironically it crashes every time I try to start it. If anyone can offer some advice, maybe there is something I overlooked, that would be great.
Specs:
AMD FX-8350 (not overclocked)
EVGA GTX 960 4gb (not overclocked)
Samsung EVO 500gb SSD (less than half way filled)
Baracuda 2TB (wish i knew the model) (almost full)
Seagate 500gb (old drive that had the os before i got my ssd) (Empty, just formatted)
HyperX FURY 8GB 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) 8gb
2x 4gb Memory sticks (I'm thinking of getting rid of these I think it's bad to mix and match)
^
I did look at CPU-Z to check my RAM frequency, I think it looks okay.
EDIT: Just got another BSOD, it reads SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
EDIT: While booting again I got KMODE_EXCEPTION_NOT_HANDLED
I got this most recent one right after booting.
I recently did a clean reset of Windows 10 onto my new SSD after cloning my old drive, so I'm surprised that I'm getting these bsod's. I've tried chkdsk /f /r, I've tried Sfc /scannow, I've run scans on MalwareBytes, I've used CCleaner, I've disabled my webcam, and I've tried WhoCrashed.exe to try and look at the dump files in the ...\Minidump folder, but ironically it crashes every time I try to start it. If anyone can offer some advice, maybe there is something I overlooked, that would be great.
Specs:
AMD FX-8350 (not overclocked)
EVGA GTX 960 4gb (not overclocked)
Samsung EVO 500gb SSD (less than half way filled)
Baracuda 2TB (wish i knew the model) (almost full)
Seagate 500gb (old drive that had the os before i got my ssd) (Empty, just formatted)
HyperX FURY 8GB 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) 8gb
2x 4gb Memory sticks (I'm thinking of getting rid of these I think it's bad to mix and match)
^
I did look at CPU-Z to check my RAM frequency, I think it looks okay.
EDIT: Just got another BSOD, it reads SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
EDIT: While booting again I got KMODE_EXCEPTION_NOT_HANDLED
Facebook
Twitter
Instagram