Is it possible to run 3 BenQ XL2411Z's on 144hz using adapters?

[TheTBK]

I have 3 BenQ XL2411Z's, they don't have any DisplayPort connections, they have VGA, DVI-D and HDMI,

AFAIK only the DVI is capable of 144hz, my 980 only has 1 DVI port so I can only have one monitor running on 144hz.

Is it possible to get all 3 monitors running at 144hz. The cables I've seen are £100-200 Dual Link ones. Is this the only solution.

I tried using a normal adapter, one end is DP one end in DVI-D, this doesn't go past 60hz.

 

[chemmajorp53]

You might be able to with active DP to DVI dual link adapters, but it probably won't be cheap. That's too bad that you have monitors without DP connections

EDIT: Looks like the maximum you can get out of an active adapter is 120hz

 

[TheTBK]

You might be able to with active DP to DVI dual link adapters, but it probably won't be cheap. That's too bad that you have monitors without DP connections

EDIT: Looks like the maximum you can get out of an active adapter is 120hz

That's what I thought, I'd seen the on amazon and the cheapest I could find was just under £100, just wanted to check there wasn't another way, many thanks none the less.