Windows 10 install can't find Raid 0 Array

[wdaniel546]

Hello there, I recently made an upgrade to AMD Ryzen. I have two Sata three SSDs running in raid 0 on the Asus Crosshair VI Hero. I'm not sure if this is normal but under boot devices the raid array show up as M.2: AMD-RAID Array. Anyway when I go to install the latest version of windows 10 and I even tried the insider build. It cannot find any drives and asks for drivers, I tried to give it the raid and chipset drivers on the Asus website but that didn't work? I have also updated the bios to the latest build and re-did the raid 0 array. Still the same issue persists. The drives do show up fine in the bios and when the raid controller initiates them just windows can't find them.
I'm not too sure what else to try, any suggestions?

 

[wdaniel546]

Can anyone help me? I'm still stuck on this issue

 

[church0724]

Can anyone help me? I'm still stuck on this issue

Have you tried this thread?

http://www.tomshardware.com/answers/id-3395597/setting-raid-ryzen-asus-crosshair-hero.html

 

[jrsublety89]

you should not have to supply chipset drivers just the raid drivers, say you were installing a sata drive back in the day via ahci not ide you would have to supply the ahci drivers right? during windows install? well if your drivers are not showing up during windows install and your rocking raid try supplying the raid drivers not the chipset drivers. please post any questions.