Monitor does not display custom pc

[Truckerdude42]

Today i built my very first pc, and after spending hours putting the thing together, the monitor says "No Signal Found." Everything has turned on, all fans are working, and mobo makes a beeping sound when it turns on. I tried using an hdmi cord to connect my monitor to my graphics card but if i do that my monitor says "No cable connected", and if i try to use the included vga cable to connect the monitor and mobo it says "No signal found." My graphics card only has hdmi and dvi.

Specs:
mobo: MSI - Z170-A PRO ATX LGA1151
Motherboard
CPU: I3-6100
RAM: G.Skill - Ripjaws V Series 8GB
Graphics Card: EVGA - GeForce GTX 1050
Ti 4GB
Monitor: BenQ - GL2460HM 24.0"
1920x1080 60Hz Monitor

Any suggestions would be much appreciated as I am getting frustrated trying to get the display to work.
Thanks in advance!

 

[Truckerdude42]

Alright so i removed my 1050 ti (graphics card) and only ran the vga to my mobo graphics. It worked.
Does that mean that i have faulty graphics card? if so should I RMA it? and buy and install a different one or will that one not work either?

 

[ffg7]

check the bios settings of the motherboard to see what video port setting is enabled as in the onboard video or the videocard.