Black screen after Windows logo

[Clawrine]

It crashed during a Witcher 3 game, now it won't show any display past the windows logo, then my monitor just informs me, 'No Display Input' .

Two drives, booting from SSD, but HDD has older Windows 10 copy.

GTX 670 and onboard intel graphics, none disabled. Have two screens running and plugged into the GTX 670, one hdmi and other displayport, displayport is the main monitor.

I reset the BIOS. Safemode is working with the GTX 670, not sure about onboard graphics. Boot order is correct. Only displayport, keyboard and mouse are plugged in. Did SFC /scannow with no results.

Please let me know if there's anything else I could try out.

Thank you.

 

[LukeFatwalker]

Sounds like a corrupted/damaged MBR.

Follow the steps here to reset: http://pureinfotech.com/repair-master-boot-record-mbr-windows-10/

If that doesn't work, you'll have to do a clean install of the OS to replace the MBR entirely. Guide: https://www.windowscentral.com/how-do-clean-installation-windows-10

Once you're up and running again, be sure to back up your machine with a backup utility (i.e. Rollback Rx or Macrium Reflect)

 

[Clawrine]

Sounds like a corrupted/damaged MBR.

Follow the steps here to reset: http://pureinfotech.com/repair-master-boot-record-mbr-windows-10/

If that doesn't work, you'll have to do a clean install of the OS to replace the MBR entirely. Guide: https://www.windowscentral.com/how-do-clean-installation-windows-10

Once you're up and running again, be sure to back up your machine with a backup utility (i.e. Rollback Rx or Macrium Reflect)

Thanks, I will carry this out and report back asap!

 

[Clawrine]

Fixing the mbr didn't work, now I'm resetting the PC while keeping personal files.

 

[Clawrine]

Sounds like a corrupted/damaged MBR.

Follow the steps here to reset: http://pureinfotech.com/repair-master-boot-record-mbr-windows-10/

If that doesn't work, you'll have to do a clean install of the OS to replace the MBR entirely. Guide: https://www.windowscentral.com/how-do-clean-installation-windows-10

Once you're up and running again, be sure to back up your machine with a backup utility (i.e. Rollback Rx or Macrium Reflect)

Nothing has worked unfortunately..

 

[LukeFatwalker]

Sounds like a corrupted/damaged MBR.

Follow the steps here to reset: http://pureinfotech.com/repair-master-boot-record-mbr-windows-10/

If that doesn't work, you'll have to do a clean install of the OS to replace the MBR entirely. Guide: https://www.windowscentral.com/how-do-clean-installation-windows-10

Once you're up and running again, be sure to back up your machine with a backup utility (i.e. Rollback Rx or Macrium Reflect)

Nothing has worked unfortunately..

Yes because you didn't follow the guide. Resetting the PC while keeping the files won't work. You'll have to do a completely clean install.

One more time, the guide: https://www.windowscentral.com/how-do-clean-installation-windows-10