How do i transfer win10 from hhd to ssd?

[DannyJayes]

Simply the title, how do i transfer from hhd to ssd?

 

[JackNaylorPE]

Each SD manufacturer has a migration tool on their web site, tho most users will install fresh.

If you do it fresh....

1. Prepare for Windows installation with USB tool
https://www.microsoft.com/en-us/download/windows-usb-dvd-download-tool

2. Connect boot drive data cable to lowest numbered SATA port .... but don't connect:
-Ethernet cable
-SATA Data Cable for any other drives

3. Install Windows to boot drive

4. Turn off Windows ability to install Hardware drivers
https://www.tenforums.com/tutorials/48277-enable-disable-driver-updates-windows-update-windows-10-a.html
http://www.sevenforums.com/tutorials/82137-drivers-turn-off-automatic-driver-installation.html

5. Install all hardware drivers from original media in boxes See Item 7 below

6. Connect ethernet cable and run Windows Update till it stops doing anything

7. Install latest drivers for ALL hardware from manufacturers web sites. The reason we didn't do this in step 5 is 3 fold:
-Sometimes MoBo CD comes with licensed utilities with product key embedded and these are not on web site versions
-Its advisable to establish a working out of box conditions
-Sometimes newer drivers require latest Windows Updates

If you have a 2nd drive ....

8. Shut down and connect HD data cable to 2nd lowest numbered SATA port.

9. Boot to BIOS and make sure that SSD is the 1st boot device, if not fix it

10. Boot to Windows

At this point it's time to decide whether to:

a) Keep the old windows install just in case OS on SSD gets infected or SSD fails, you can still boot.
b) Delete the old Windows install.

 

[USAFRet]

Either clean install as per direction above.
Or clone, as per directions here:

-----------------------------
Verify the actual used space on the current drive is significantly below the size of the new SSD
Download and install Macrium Reflect (or Samsung Data Migration, if a Samsung SSD)
Power off
Disconnect ALL drives except the current C and the new SSD
Power up
Run the Macrium Reflect (or Samsung Data Migration)
Select ALL the partitions on the existing C drive
Click the 'Clone' button
Wait until it is done
When it finishes, power off
Disconnect ALL drives except for the new SSD
Swap the SATA cables around so that the new drive is connected to the same SATA port as the old drive
Power up, and verify the BIOS boot order
If good, continue the power up

It should boot from the new drive, just like the old drive.
Maybe reboot a time or two, just to make sure.

If it works, and it should, all is good.

Later, reconnect the old drive and wipe as necessary.
Delete the original boot partitions, here:
https://social.technet.microsoft.com/Forums/windows/en-US/4f1b84ac-b193-40e3-943a-f45d52e23685/cant-delete-extra-healthy-recovery-partitions-and-healthy-efi-system-partition?forum=w8itproinstall
-----------------------------

 

[DannyJayes]

Either clean install as per direction above.
Or clone, as per directions here:

-----------------------------
Verify the actual used space on the current drive is significantly below the size of the new SSD
Download and install Macrium Reflect (or Samsung Data Migration, if a Samsung SSD)
Power off
Disconnect ALL drives except the current C and the new SSD
Power up
Run the Macrium Reflect (or Samsung Data Migration)
Select ALL the partitions on the existing C drive
Click the 'Clone' button
Wait until it is done
When it finishes, power off
Disconnect ALL drives except for the new SSD
Swap the SATA cables around so that the new drive is connected to the same SATA port as the old drive
Power up, and verify the BIOS boot order
If good, continue the power up

It should boot from the new drive, just like the old drive.
Maybe reboot a time or two, just to make sure.

If it works, and it should, all is good.

Later, reconnect the old drive and wipe as necessary.
Delete the original boot partitions, here:
https://social.technet.microsoft.com/Forums/windows/en-US/4f1b84ac-b193-40e3-943a-f45d52e23685/cant-delete-extra-healthy-recovery-partitions-and-healthy-efi-system-partition?forum=w8itproinstall
-----------------------------

What if my ssd is pcie? meaning it doesnt connect tot the same place?

 

[USAFRet]

What if my ssd is pcie? meaning it doesnt connect tot the same place?

Adjust steps as necessary.
Primarily, the very first thing you must do after the cloning process is finished is to turn the system off and disconnect the original drive.

Allow the system to (hopefully) boot up from the new drive.

This is by far the most common cause of a cloning fail.