ASUS Geforce GTX 1050Ti STRIX OC Edition won't run 3 screens?

[bladexdsl]

i got this card for my hyperpin cabinet to run one TV and 2 computer monitors. i was told this card would be adequate for this at VPF but i have been trying all day with every port and all configurations possible using display port, hdmi and dvi BUT i can only get 2 screens to ever show up?

 

[Phillip Corcoran]

If it's the TV screen that won't give you anything, you may have to select the correct external input through the TV's built-in menu system.

 

[bladexdsl]

i have the tv screen connected but only one of the pc monitors show up with it.. all 3 screens will not show up/be detected in the display properties.

 

[Phillip Corcoran]

Your not connecting one of them to the on-board GPU are you?

All three displays must be connected to the ports on the GTX card unless motherboard's BIOS/UEFI supports using both GPUs simultaneously (and it's enabled).

 

[bladexdsl]

they are all connected to the card none on-board GPU. tv is in display port and other 2 monitors are in the two dvi slots.

Full specs:
=======

Tv's
-----
tv : SONIQ 42" LED TV.
Acer 27"inch LCD Widescreen Monitor.
Asus VB171T 17" LCD DVI/VGA Monitor.

Computer and cab misc parts
------------------------------------------
Windows 7 64bit home.
Thermaltake Litepower 600W ATX Gaming Power Supply.
AMD Phenom II X4 Processor 965 (3.4GHz) AM3, Retail.
Asus Crosshair IV Formula Socket AM3/ AMD 890FX/ CrossFireX/ SATA3.0&USB3.0/ A&GbE/ ATX Motherboard.
G.Skill Ripjaws X Series 8GB DDR3/1600, PC3/12800 fast 8-8-8-24 timings CL8 RAM.
60GB SSD sata HDD.
Corsair Hydro H70 cpu cooler.
ASUS Geforce GTX 1050Ti 4GB ROG STRIX OC Edition