my brand new pc build turns on but my monitor receives no signal

[homework.is.amazing]

first lets start off with my build:
i5 7600k
gigabyte ga-b150m-hd3 ddr3
corsair 500w
seagate 1tb hard drive
asus gtx 1060 3gb
cooler master hyper 212 evo
2x4gb ddr3 avexir ram
ALL OF THE PARTS ARE NEW


so lets get to the problem now when i turn on my computer everuting seems to work fine but when i plug it into the monitor the monitor says that there is no signal i have tried pretty much rebuiling the whole thing i made sure that everything was connected correctly can someone please help me

 

[Olle P]

Set UEFI to disable the IGP and connect the monitor to your graphics card.
Also make sure your monitor takes the signal from the correct port.

 

[Calvin7]

B150 Chipset needs a BIOS update to F20 in order to use 7th Gen CPU. In order to get the motherboard working to flash the BIOS a 6th Gen Skylake processor needs to be installed. A Celeron G3900 is about $40.

Many people skip the older Intel 100 Series B150 Chipset models and use the newer Intel 200 Series B250 Chipset model that needs no BIOS update to use 7th Gen Kaby Lake CPU.

https://www.newegg.com/Product/Product.aspx?Item=N82E16813128980

https://www.newegg.com/Product/Product.aspx?Item=N82E16813128984

 

[homework.is.amazing]

B150 Chipset needs a BIOS update to F20 in order to use 7th Gen CPU. In order to get the motherboard working to flash the BIOS a 6th Gen Skylake processor needs to be installed. A Celeron G3900 is about $40.

Many people skip the older Intel 100 Series B150 Chipset models and use the newer Intel 200 Series B250 Chipset model that needs no BIOS update to use 7th Gen Kaby Lake CPU.

https://www.newegg.com/Product/Product.aspx?Item=N82E16813128980

https://www.newegg.com/Product/Product.aspx?Item=N82E16813128984

isnt there a way to perform the bios update without buying another cpu?

 

[Olle P]

Gigabyte is a bit fuzzy on if you need to have a CPU installed for using Q-flash, but seem to assume that there is one.
Perhaps you can just borrow a Skylake CPU from a friend/relative to do the update?