Can't load win10, stuck in startup hdd diagnostics loop

[lenene10]

I cannot load up windows 10, because i got stuck.
It wants to run HDD diagnostics, and i cant stop win10 from doing it , like in the photo below. It doesnt do anything at all.
I just stuck up in a game and did hard reset.
I cant even load up in safe mode.

https://photos.app.goo.gl/QTUc1sCaSLBioA3Q2

 

[mazboy]

Can you get into BIOS on startup using a Function Key or "esc"? If so, use your Win10 Recovery Disk (USB stick) or Win10 installation USB Stick to repair/recover the OS. If you can't get into BIOS, you may need to clear you cmos at the motherboard.

 

[lenene10]

Can you get into BIOS on startup using a Function Key or "esc"? If so, use your Win10 Recovery Disk (USB stick) or Win10 installation USB Stick to repair/recover the OS. If you can't get into BIOS, you may need to clear you cmos at the motherboard.

I managed to enter windows 10 by plugging out the SATA cable from the HDD which windows wanted to diagnostize.
(OS is on my SSD, i have 2 hdd and 1 ssd)
Now i need to know how to stop win10 from wanting to diagnostize my HDD

 

[mazboy]

OK, we need to go back to the beginning. Shut the computer off. Unplug all the drives except the boot drive. Start the computer. What happens?

 

[lenene10]

OK, we need to go back to the beginning. Shut the computer off. Unplug all the drives except the boot drive. Start the computer. What happens?

By the time, it turned out that one of my HDDs died completely. I removed it and i have no more problems.
It was a defective hard drive.
It's just strange why i wasnt able to skip the hdd diagnostic at bootup.