Tried everything, Display still doesn't show.

[nakul_d2]

Monitor is not reading my PC input, I have cleaned my RAM, Checked all the cables, rebooted the PC and the monitor and even used a different monitor. There is no signal reading on both monitors. Does not even flash my PC screen, just acts as if nothing was plugged in.

 

[scout_03]

your motherboard have a onboard video chipset remove gpu and try to plug monitor to it for video .

 

[nakul_d2]

your motherboard have a onboard video chipset remove gpu and try to plug monitor to it for video .

Is there a port for HDMI/VGA in the actual PC, I'm looking at my motherboard right now, not sure where the chip set is

 

[scout_03]

name and model of board .

 

[nakul_d2]

name and model of board .

ASRock H97 Anniversary

 

[scout_03]

use the dvi-d connector on the back also does your intel cpu have onboard video chipset check this .

 

[nakul_d2]

use the dvi-d connector on the back also does your intel cpu have onboard video chipset check this .

removing the gpu right now, will check

 

[nakul_d2]

use the dvi-d connector on the back also does your intel cpu have onboard video chipset check this .

Okay GPU is removed, I see some ports on the bottom right of my motherboard but not really anything by my intel cpu

 

[scout_03]

connect monitor to dvi-d and boot system to see if you have video on it .

 

[nakul_d2]

connect monitor to dvi-d and boot system to see if you have video on it .

I currently do not have a dvi-d cable, is there any alternative?

 

[scout_03]

the d-sub or hdmi .

 

[nakul_d2]

the d-sub or hdmi .

Is there an HDMI port on the motherboard? There is one on the outside which I have been using in the past, but like I said, the monitor still won pick up that signal

 

[scout_03]

could it be that your hdmi cable is broke see if you could borrow one .

 

[nakul_d2]

could it be that your hdmi cable is broke see if you could borrow one .

Okay something interesting happened, the monitor gets the signal when I remove the GPU but it cant read my PC after I put it back in

 

[scout_03]

have the gpu test in another sytem to see if you have same issue also you could use a old gpu to test signal to monitor .

 

[nakul_d2]

have the gpu test in another sytem to see if you have same issue also you could use a old gpu to test signal to monitor .

reset the monitor and plugged into the GPU slot, everything seems to be working now! Thank you so much for your help!

 

[scout_03]

could it be that the gpu was not well seated in board slot and back screw holding it was not on .

 

[nakul_d2]

could it be that the gpu was not well seated in board slot and back screw holding it was not on .

Maybe, but wouldn't have thought it was my GPU if you didn't let me know to take it out, thank you! Been trying to troubleshoot this for the past 2 hours!