hit computer power cable by accient then computer restarts and shows a black screen saying Intel firmware 7.1.10.1065

SlasherSquid01

Commendable
Apr 3, 2017
234
0
1,690
my friend hit his power cable with a vacuum on accident and his computer shut down. When he turned his computer back on all there was showing on screen was the bios and it didn't load into windows 10 or he couldn't press any buttons. I told him to take out the cmos battery and put it back in since l saw a similar post on how to fix this problem so l saw no harm in doing it. when we turned the computer back on it showed the bios again then showed a black screen saying all of this:https://docs.google.com/document/d/1NNMLx3P6DBZbrFfpApFxKOB3s-8LircWBgjpc9J0GKQ/edit?usp=sharing

can someone please help
 
In the mean time, with the PC off, disconnect the power cable from the back and if the PSU have an On/Off switch turn it Off.
Disconnect all devices attached to the PC and just leave the keyboard.
Connect the power cord back, power On PSU and turn the PC on.
Is the PC responding to the keyboard?