New Pc Build But No Signal to monitor Everything else gets powered.

[nerbylul]

I've recently just built a pc and everything is powered on but wont output any signal to the monitor
Specs:
CPU: Ryzen 3 2200G
RAM: Patriot Signature Line 8GB (2x4)
Motherboard:ASRock A320M-DGS
Case: Rosewill Srm-01
PSU: Thermaltake 600w Smart

I Have tried changing the ram and it didn't effect anything.
I've also tried reseting the cmos but I didnt get a signal still.
I also tried a different motherboard and psu but still havent gotten a signal.
The monitor i'm using is a Sceptre C 32-Inch Screen LED-lit Monitor and it doesn't have any dvi to input so i'm using a dvi-d to hdmi and it wont give any signal any suggestions?

 

[terry4536]

Try using an HDMI cable to a TV or another monitor. Is there a graphics card?

 

[nerbylul]

Try using an HDMI cable to a TV or another monitor. Is there a graphics card?

There is no GPU just running off the IGPU from the Raven Ridge Cpu

 

[terry4536]

If there is no display with another monitor (or a TV) and using a different monitor cable, then you can safely say that the motherboard is defective.

Depending upon where you purchased it, there is usually about thirty days to return it. So keep an eye on the calendar as you troubleshoot the PC.

 

[terry4536]

Seems odd that there is only a single video output the DVI-D.

 

[nerbylul]

Seems odd that there is only a single video output the DVI-D.

Yeah even the tv says no input